I have gone and posted some pics to

Pics
They are described on the page.

They are all the of the harnesses we could not remove so they have been rewired temp, to try to start the car. I think our fault lies in the coil wiring.

I am totally at a loss trying to get spark. I believe the coil is wrong. If someone could tell me EXACTLY what wires should be around the coil. This harness was cut by mistake, so i have gone ahead and tapped into it by the floor with some butt connectors to get signal across, ignoring needed lines. I am unsure of the coil connections from the ignitor, as i dont understand the schematics i have recieved, as some say + is pulsed, while some say -. Any help would be great, ESPECIALLY pictures of an engine bay coil wire up. Also i have a pic of the dizzy as i am unsure of what wire goes on the tab. Rember this harness was cut so i am improvising to the best of my knowledge. Also the harness by the battery has been jumped with +12 to the BW wire, making the green EFI click, i believe this is all that is needed. Thank you very much as i really appreciate this.

-Matt

PS. Please email at MBaran@socal.rr.com