S-13 Rims do fit Zs
#5
Guest
Posts: n/a
Re: S-13 Rims do fit Zs
do you mean the orignal 15x6inch rims...
or where they aftermarket rims...
<font color=blue>76 260z</font color=blue>
The NiteRider
or where they aftermarket rims...
<font color=blue>76 260z</font color=blue>
The NiteRider
#6
Guest
Posts: n/a
Re: S-13 Rims do fit Zs
I thought that they where 16s ? but they are ugly anyway and you wouldnt want to use them .... its more the point that u can go to a wheel and tyre dealer and say i want rims to fit an S-13 and instead of them saying yeah we have 1 pair they will say yeah we have heaps !
Rusty Datsun x 2
1x Primer Gray 260Z 2+2 (Soon to be WRX blue)
Rusty Datsun x 2
1x Primer Gray 260Z 2+2 (Soon to be WRX blue)
#11
Guest
Posts: n/a
Re: S-13 Rims do fit Zs
Huh? Not even close, offset must be more than an inch off. I tried (even though I KNEW it wouldn't work) to put my z race tires (14x7, 225/50ZR14s) on my '89 240SX. The tires stuck out WAY beyond the fenders. You sure you don't have spacers bolted onto your Z's hubs? My 240SX wheels would interfere with the struts on my Z in a big way.
#12
Re: S-13 Rims do fit Zs
I am going with Dan on this one. All the databases I have looked at list the US Spec S13 ( 240SX) at a + 40mm offset.
That makes it around 1 1/2 " . I did pull a set of Z wheels off a
200SX once . They seemed to fir okay but they were 14 " x 6"
turbo wheels with a +10 offset.
Mike
That makes it around 1 1/2 " . I did pull a set of Z wheels off a
200SX once . They seemed to fir okay but they were 14 " x 6"
turbo wheels with a +10 offset.
Mike
#13
Guest
Posts: n/a
Re: S-13 Rims do fit Zs
aahh ok then well teh japanese S-13 silvia must have a different offset because i had a 15x 7" silvia rim bolted onto a 260Z 2 seater ..... and i know what spacers are and no it doesnt have them ..... they are illegal in the state i live in in australia
Rusty Datsun x 2
1x Primer Gray 260Z 2+2 (Soon to be WRX blue)
Rusty Datsun x 2
1x Primer Gray 260Z 2+2 (Soon to be WRX blue)
#14
Guest
Posts: n/a
Re: S-13 Rims do fit Zs
These rims were they the K (wide spoke) or Q (flat with like 20 billion circles on the edges) style rims? I'm guessing the rims you tried out were stock right? Just like most people in the U.S. I tried this. They're too much of a postive offset. I know the Q rims aren't here, well I haven't seen them yet. I'm not sure what is on the 240SX here, but I know the wheels won't fit. Be there, then that.
Chris
1981 280ZXT
Chef Tickwon
Ksss Ksss
Chris
1981 280ZXT
Chef Tickwon
Ksss Ksss
Thread
Thread Starter
Forum
Replies
Last Post
SandW
For Sale (VIEW ALL)
0
10-31-2006 09:26 PM
Bookmarks