pull the engine to change oilpan gaskett?!!!
Guest
Posts: n/a
Re: pull the engine to change oilpan gaskett?!!!
u don't i;ve done it with the engine bolted in, just need a little bit of manuvaring...
the manual says it cause it is really easy to get out once u lifted it up 1 inche or so... if u can't be bothred don't worry.. if u can be do it its easyier... espcially to clean the bottom of the block for prepping for the new gasket
<font color=blue>76 260z</font color=blue>
The NiteRider
the manual says it cause it is really easy to get out once u lifted it up 1 inche or so... if u can't be bothred don't worry.. if u can be do it its easyier... espcially to clean the bottom of the block for prepping for the new gasket
<font color=blue>76 260z</font color=blue>
The NiteRider
Registered User
Joined: Mar 2002
Posts: 6
From: Vandenberg AFB, CA
Re: pull the engine to change oilpan gaskett?!!!
i replaced the oil pan gasket on my 78 280 w/o pulling the motor. it takes some maneuvering, but it can be done. plan on knocking your knuckles alot !!
Tony Martucci
78 280
http://www.geocities.com/mar2c/280z.html
Tony Martucci
78 280
http://www.geocities.com/mar2c/280z.html
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
