Webber Carbs on 240z?
#1
Guest
Posts: n/a
Webber Carbs on 240z?
Hey My name is Joe and I have a 73' 240z in Northern California. I was justwondering if anybody has any info or advice for the Webber 32/36 DGV Kit, I found the listing for them in Victora British LTD. Just wanted to see if anybody has them or knows how they run and install. The kits are only around 1 grand and look like they don't require any changes to the current setup.
Any help would be greatly appriciated.
Any help would be greatly appriciated.
#2
I have a set of used 32/36DGV Webers... and a brand new in box spare... as well as 2 rebuild kits... ohh.. and all of the installation hardware and manifold Ls....
I will sell them all to you for $200 you pay shipping...
You do have to modify the linkages and the crossover tube to use the Weber throttle linkages.
I took them off of my car.. and replaced them with Z-Therapy rebuilt SUs
The Weber DGVs are not the best design for a Z car... there are a lot of issues with fuel pooling in the manifolds... poor mixture distribution.... more complex tuning....
They were the cheap way to replace late model carbys on 240/260Zs.... the better way is to get a set of Z-Therapy SUs...
I will sell them all to you for $200 you pay shipping...
You do have to modify the linkages and the crossover tube to use the Weber throttle linkages.
I took them off of my car.. and replaced them with Z-Therapy rebuilt SUs
The Weber DGVs are not the best design for a Z car... there are a lot of issues with fuel pooling in the manifolds... poor mixture distribution.... more complex tuning....
They were the cheap way to replace late model carbys on 240/260Zs.... the better way is to get a set of Z-Therapy SUs...
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks