abosoxfan4life

I need all the pieces! Would rather the t3 set up but would take either. 321-480-8083 is the easiest way to get a hold of me!

PredatorZ

You might find it easier to find a wrecked or rusted out turbo and get all the parts that way, even if the turbo needed rebuilding, you need all the manifolds and piping , the wiring harness and ecu from a turbo, so a donor car is the best way to go. You could spend a small fortune buying a turbo setup piece mill. You might contact Steve, he buys and parts out Z31's, he might have everything.

300zx Parts For You webpage

abosoxfan4life

Why would I need a wiring harness? And thanks.for the contact. I'll get with him.

PredatorZ

A turbo has a different ECU, thus a different harness and all different electronics, perhaps you need to do a little more research, because that is turbo swap 101

PredatorZ

Since a turbo makes more power, you will need bigger turbo injectors also. Crank position Sensor is a turbo only part too I think, so you will need one of them... thus more wires, and a different harness

abosoxfan4life

From the redz31 build he never mentions any type of harness extension. And I'm pretty sure my NA has a cps

abosoxfan4life

Also the harness Will plug into the difference ecu without getting a new harness...