..well i just got a 240sx trottle body ...i looked for the spacer on ebay but i couldnt seem to find it ...there not listed right Now....
does anyone have one?.....also is there anything other than that i will need for this mod ? .for now iam going to clean this this beast up wit some carb cleaner ...

 

http://www.arizonazcar.com/inject.html

$36.00

 

OK NICE J .thanks man ...i emailed him and he already ...he emailed me back super stoked ..6 bucks for shipping ....ok do i use the throttle sencor on this one or do i take the one off the z now and slap it on the the 60mm???? ... i think got the linkage figured out ..i can just swap the linkage arm and it will hook right on????..that is what it looked like to me anyways ...does anyone one have any pics of this set up ....i would like to take a closer look ...that way i dont mess up anything ..

 

it will give you a little more throttle with just installing it with out porting the intake snapier off the line ..but it would be better to port it now ...i just dont want to port this intake ..i want one from the older z's without the runners so my header would breath better and porting thoughts make alot more of a diff ..+ you lose all the egr stuff and they look alot cleaner ...i hope i fined one when i go to this junk yard ...i neeed to go there a look around again soon

 

i found this page looking for info on this mod ....seems that this wont be to hard ..iam going to order the spacer monday and then just make some gaskets out of gasket paper ......does anyone out there have a old stlye z intake with out the runners they want to sell?...... i would love to have this one listed on ebay ....


trottle body page
http://www.angelfire.com/extreme/280zxt/page9.html

sick intake
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

 

it wont do anything if its not ported...i believe sombody did research and found out (maybe it was you Bleach, sombody told me anyways) that it was worse off then the stock if its not ported...

 

yup! It was WORSE without porting. The throttle will be more sensative, but you get more torque and horsepower with the stock throttle vs the 60mm and no porting. Especialy since you have no other work done and you're running a stock cam.

 

tought so..thanks now come you know where...

 

its cool iam going to make a bid on the 80mm unit ..cross your fingers ...lololol..if not i will get a spacer and wait untell i find a extra intake and do the full thing porting and all........ i trust bleach but i cant never stop mess wit my beast..i would like more trottle ...it never feels like its eff anymore ....
i didnt call on thAT turbo car yet ...i dont know... iam just used to my car and wanting more ..mod this fiddle wit that ..you know.. **** if i mod it , i always make sure i can put it back the way it was... just in case ,
i like better that way.....lololol

 

well that is ebay for you ...the one bider has his bid jacked up there so far that it out bids you ..i hate ebay ...that is such a sick intake i want it so bad..but i wouldnt dought the bid is above $250.... : (

 

An 80mm would be a stretch anyways. I dont know that the stock manifold has enough meat on it to be ported big enough to accept the 80mm. The 60mm is pushing it as far as grinding right through the metal goes.

 

yeah if you want a complete port on a 60mm it comes close to going trough...80 would fit over top of that manifold like a collar!! hehe

 

That intake it self was 80mm and the throttle body to the auction was for the intake and trotttle body ..**** i dont think that you could even get it to port that much on the the stock one .....

 

A lil off topic, but about the T/B, and no need for a new thread, so, What's the year range for the T/B from the 240SX to fit on a 280ZX N/A?