Race Z parts
Guest
Posts: n/a
Race Z parts
Dear all:
OK, I didn't get any bites on my race car. Therefore, I am forced to part it out. It hurts, but here goes. Contact me directly at dat7001@humboldt.edu or (707) 839-3375 evenings or machine. Dennis
Parts for Sale
1971 Z Body with coil overs, cage, and rear fenders (cost depends on additions below) 1000
Fiberglass body
front GTU fenders (Jim Cook Racing) with headlight covers
(one side new, retails for $325 new) 250
hood 50
fiberglass doors 80
fiberglass rear deck with acrylic window and straps and straight plane spoiler 50
Total for fiberglass 400
Gutted steel rear deck with acrylic window and straps 50
Real Time 16X10 three piece wheels (look new, one season) 400
SSR 15X10 three piece wheels
(1 new still in plastic just purchased for $350, others in good shape) 500
Rotors and hats
(Work with Wilwood Super light calipers), 3 brand new front
Coleman rotors, 1 front slightly used, 2 rear in good shape 500
New Hoosiers 245 50 15's road race (one heat cycle) (work well on 15X10wheels) 400
Tokiko rebuildable racing shocks (in good shape, ready to race) 200
Springs new 325 lb 2.5 X 10" 60
Differential R180 4:38 with Quaiff (<1hr use, set up by Rebello) 1200
Differential R180 4:11 locked (can be used with Quaiff above) 250
Differential R190 4:44 LS 850
Differential R200 3.9 locked 250
Sway bars (F 1", R 7/8") 250
Arizona Z car tubed rear A-arms never used on track 350
Tilton pedal system with master cylinders and cable bias adjustment 250
Aluminum radiator (will handle >450 hp) stock mounts 150
Fuel cell - ATL 15 gallon (foam in good shape) 300
Momo steering wheel (excellent condition) 150
OK, I didn't get any bites on my race car. Therefore, I am forced to part it out. It hurts, but here goes. Contact me directly at dat7001@humboldt.edu or (707) 839-3375 evenings or machine. Dennis
Parts for Sale
1971 Z Body with coil overs, cage, and rear fenders (cost depends on additions below) 1000
Fiberglass body
front GTU fenders (Jim Cook Racing) with headlight covers
(one side new, retails for $325 new) 250
hood 50
fiberglass doors 80
fiberglass rear deck with acrylic window and straps and straight plane spoiler 50
Total for fiberglass 400
Gutted steel rear deck with acrylic window and straps 50
Real Time 16X10 three piece wheels (look new, one season) 400
SSR 15X10 three piece wheels
(1 new still in plastic just purchased for $350, others in good shape) 500
Rotors and hats
(Work with Wilwood Super light calipers), 3 brand new front
Coleman rotors, 1 front slightly used, 2 rear in good shape 500
New Hoosiers 245 50 15's road race (one heat cycle) (work well on 15X10wheels) 400
Tokiko rebuildable racing shocks (in good shape, ready to race) 200
Springs new 325 lb 2.5 X 10" 60
Differential R180 4:38 with Quaiff (<1hr use, set up by Rebello) 1200
Differential R180 4:11 locked (can be used with Quaiff above) 250
Differential R190 4:44 LS 850
Differential R200 3.9 locked 250
Sway bars (F 1", R 7/8") 250
Arizona Z car tubed rear A-arms never used on track 350
Tilton pedal system with master cylinders and cable bias adjustment 250
Aluminum radiator (will handle >450 hp) stock mounts 150
Fuel cell - ATL 15 gallon (foam in good shape) 300
Momo steering wheel (excellent condition) 150
Guest
Posts: n/a
Very interested in your fiberglass hood and either/both rear decks. I am sending an email as well. Please contact me at mike-eckhaus@***.net Thanks
Mike
Mike
Thread
Thread Starter
Forum
Replies
Last Post
egmar
240Z, 260Z, 280Z Brakes, Wheels, Suspension and Chassis
4
Jun 1, 2005 11:23 AM
Bookmarks
