Parting out an abandoned project from a few years ago... I have some pictures but if you're interested in something else please ask. I live in upstate NY (saratoga springs) and spend time in manhattan so I would be willing to deliver to some extent... pickup preferred though

Tokico 5 way adjustables/ 1 inch lowering springs installed in front towers, wheel bearings replaced as well. I have the rears but never got around to installing them or rebuilding the towers. New tie rod ends and ball joints. I also have the toyota rotors and calipers that are new unused as well. Glass is good and I believe I have a new rocker panel for the driver's side - Motorsport! Rocker Panel, Left, 70-73 240Z - The Z Store! Nissan-Datsun 240Z-260Z-280Z-280ZX-300ZX(Z31/Z32)-350Z-370Z Parts

PM me with any inquiries... I'm not looking to get rich here!

 

Hello, i was wondering if you happen to have the passenger side wheel fender and right headlight case?

 

What do you mean by headlight case? I have a fender as well... Let me get back to you on the condition.

 

Turns out that I have one mint passenger's side fender for a 240z.

 

Do you have any pictures of the bumpers and that mint fender by any chance? Price?

 

How much for the shocks & springs?

 

Unfortunately the shocks have been sold... I have pics of the fender, I will post them later today.

 

Good guy alert --> Lewis Durbin ZDriver.com - View Profile: Lewis Durbin

 

thanks I cant wait for the new shocks

 

Sorry for the delay, I've been very busy with a new job. I have the pictures but my phone is not letting me copy or paste. The pics are on my photobucket and I will post them today. The fender is NOT off my car; I bought it a few years ago from a member of a different Z forum. It is in primer and has no rust or dents.

Edit: voila she works now. The white spots in the pictures is hay and dust flying around btw

 

The pictures make these parts look ugly... they are dirty but I can assure you they are NEW, they were ASSEMBLED AND NEVER USED.

I rebuilt the hubs... they have new races and new bearings inner and outer. The third pic shows the custom aluminum bushing made so the Datsun hubs will bolt to these big vented/drilled rotors. The lug nuts and wheel studs are new as well.

 

I also have the Toyota calipers to go with it! I also purchased new high quality bearings from Timken that go on those spring plates on top of the strut assembly... They were not easy to find. Make me an offer!

 

How much for the fender? also, do you have the plastic pieces that go behind it?

 

How does $120 shipped sound? Sorry but I don't have the plastic pieces.

 

$100 shipped? For the fender? Make me an offer on this brake setup, it's not doing me any good sitting on the floor of my apartment! These hubs and COMPLETELY rebuilt and the brakes are new.

Does anyone need any prothane bushings?

 

how about the front turn signals, what would you like for them?

 

Im looking for a drivers door cars and anti sway bars if you have any

 

How does $60 shipped sound to you?

 

I have the doors off - let me get back to you with the condition. Are you looking for the stock roll bars that connect to the control arms?

 

now I'm just looking for door cards in good shape

 

Another goodguy --> dhp123166 ZDriver.com - View Profile: dhp123166

 

How much for the calipers alone?

And how much for the calipers and brake discs?

 

would you take $280 shipped for all 4 shocks?

 

I am interested in the brake set up How much for the whole set up shipped ?
How much for the front valance 3 pieces I am in NC thanks