G-Nose Headlight Covers
 

Hi ZG-nose owners, my name is Mark Clapp. I'm an individual from Kansas City, Missouri U.S.A. and I make the headlight covers for the G-nose Zs. The plastic I use will not crack so you don't need the special drill bits for plastic like the ones needed for acrylic (Plexiglas). Any old bit will do fine with no cracking. I make them in the OEM size to fit under the trim rings and I used OEM covers for my patterns. If you don't have the trim rings, I also make them in a smaller radius for a flush fit with the light bucket edges. For these I include L-braces made from the same crystal clear plastic. From a short distance, the L-braces disappear so the covers look like they are floating on the car. I'm asking $189 USD/pair and the shipping is covered with $20 inside the U.S. and $30 to overseas. Please email me at: mclapp5526@gmail.com if you have any questions and feel free to call anytime at: 816-286-6982 to talk about your car and the light covers.
Thanks,
Mark Clapp
816-286-6982

https://cimg1.ibsrv.net/gimg/www.zdr...66daede80f.jpg
https://cimg6.ibsrv.net/gimg/www.zdr...9c364954d0.jpg
https://cimg2.ibsrv.net/gimg/www.zdr...c8d71a4acf.jpg
Hi Guys and Gals, I see it's been a while since I posted about the G-nose light covers I make. I'm still making them in the OEM size for use under the trim rings and also in a smaller radius for a flush fit with the light bucket edges in case you don't have the trim rings. I still use crack-proof plastic and am asking the same price at $189/pair. Email me at: mclapp5526@gmail.com with any questions and feel free to call anytime at: 816-286-6982 to talk about your car and the light covers.

Thanks,
Mark Clapp
816-286-6982