Motor parts
#1
Motor parts
I am pulling the motor out of my 280ZX. Any one need motor parts? 2.8 liter fuel injected, nothing special, just basic motor,
#2
I'm guessing my your name where you are but still, listing a location will help you and others out since these tend to be large expensive items to ship.
If you are close to me I may be interested in the block if it's an F54.
If you are close to me I may be interested in the block if it's an F54.
#4
Originally Posted by bjhines
I would like the pistons and rods.....I need flat top pistons.
#5
Are they flat top pistons???...I am only interested in reusable flat tops.
I am in no hurry...how much $ do you want for them and shipping?
I actually just want the FLAT TOP pistons....but you cannot properly remove the pins without a machine shop....soo i'll take the rods attached.
Please wrap them in tissue paper and pack them so the sharp edged rods wont damage the soft pistons ....also stuff something in the skirts so they dont rattle against the mounted rods.
please do not hammer the pistons out of the bores....use a ridge reamer and lots of oil.....they are useless if you damage the ring lands.
I am not trying to be a pain....but I have had SEVERAL people ship me used parts they packed like scrap metal....and ended up being scrap metal. It is a pain for me and you.
I am in no hurry...how much $ do you want for them and shipping?
I actually just want the FLAT TOP pistons....but you cannot properly remove the pins without a machine shop....soo i'll take the rods attached.
Please wrap them in tissue paper and pack them so the sharp edged rods wont damage the soft pistons ....also stuff something in the skirts so they dont rattle against the mounted rods.
please do not hammer the pistons out of the bores....use a ridge reamer and lots of oil.....they are useless if you damage the ring lands.
I am not trying to be a pain....but I have had SEVERAL people ship me used parts they packed like scrap metal....and ended up being scrap metal. It is a pain for me and you.
Last edited by bjhines; 11-05-2004 at 07:58 AM.
Thread
Thread Starter
Forum
Replies
Last Post
n2_280z
Wanted (WTB / WTT)
0
06-11-2003 11:44 AM
Bookmarks