Companion Flanges and stub axles from 280ZX Turbo $75 shipped

 

More parts

 

And more...

 

and little more...

 

do you have any hoods for a 1983 280 zx turbo? if you do how much including shipping to zip 78332?

 

I have three Hoods,but the issue is the shipping cost and the hassle.
If you have anybody can pick it up or you arrange the shipping then I will let go cheap to help($40).
Jamal

 

I need ignition, door handles, and hatch lock, with all the same key. If you have a set please let me know.
How much do you want for the interior quarter panels?

 

I have ignition with one key in very good condition,the key will stay in with the on position ($50) and i have both doors lock and handles and hatch in different one key($40),That means you will have two keys for every thing.Sorry I don't have one key opens every thing(hard to find these days)
The rear 1/4 panels are $50 for both + shipping ($35).
Thanks for the interest
Jamal

 

Driver side fender sold,still have the headlight bucket though.

 

Bump and a shoutout to Borini, he sent me the item before my 'e-check' cleared. Thanks a lot got it today.

 

Thank You skully for your kind words.Glad to know that you got your part.
Thank you again.
Jamal

 

When I get to the point of restoring my Z's. I will get all my locks changed to fit one key. That is one of my plans. It shouldn't cost more than $200 to get everything re-keyed to one key. And it will be worth it in the long run.

 

Look at you Aaron.Nice wheels and they flush nice with the fenders.Time to drop it a notch.
Are you selling the swastikas?
Jamal

 

Thanks Jamal. Take a look at my wheels thread in the 280zx section. The pictures are a little bigger there.

I am kind of afraid to drop it lower. Because of my rear subframe being shifted over. I still thought about doing it. But I am afraid I will have uneven tire wear on the rear tires, if they are too low. That is what the guy said at the alignment shop. That is mainly why I put the spacers in the rear springs. To raise up the back more to keep the tires more even. If you look closely, you can see they are slightly angled. Because of the rear subframe being off. And it shifted at some point in the past.

As for the swatztikas. I am probably keeping those for my Bluestreak in the future on my '82 T-Top. Sorry man.

 

Engine harness Sold,Red doors sale pending.

 

Hi I'm looking to see if you still have the Vacuum control modulator <located right beneathe the AFM> and also lookin for the wiring harness that goes from the ecu to the coil and ignition. thank you!

 

Hey Jamal: Do you still have that manual climate control switch? I could use one, I really need to fix mine. So I can try and get a/c in my Z. lol Let me know man.

 

Jamal

Would you have a 280ZXT Coil with bracket/Transistor ?
Shipping to 92844 Garden Grove CALIF

Next would be a 82-83 Turbo distributor with internal Crank Angle Sensor

Regards, John
Paypal is fine with me.

 

I do have one Aaron.I will save it for you.
Jamal

 

If your z is a Turbo then yes I do have one.$35 shipped.
Let me know o Pm me.
Jamal

 

Sold both last ones to a guy in Norway.Sorry.

 

Thanks man, I will let you know when I can get it from you. How much would you want for it shipped to my house?

 

I will send you the whole switch setup(look at the picture) for $35 Shipped,Is that works for you?

 

And you are sure it is a fully functioning unit? Just making sure. And yes $35 sounds good. Paypal again? And I will let you know when I can send you payment. Thanks again man. It would be nice to have a/c in my Z. lol

 

Yep works fine.Paypal is fine.
Thanks Aaron.