clarification of rizzspeed's comment
regarding https://www.zdriver.com/forums/showt...&threadid=7525
Originally posted by rizzspeed "The first generation (Z31) had inline six's as well. The second generation 300zx's (Z32) had V6's. With both generations having N/A and Turbo variants." The correct answer to Datsunguy's question would have been what ZXBoy said... "1st gen had v-6's also, just sohc instead of dohc" Z31's had the VG30E or VG30ET, both SOHC V-6 engines, which produced 160/200hp respectively. (165/205hp for 88-89 models) |
Some, if not all of the '84 Z31's had inline 6's. When I purchased my '85 Z31, I had looked at several 84's as well. I remember them having inline 6's. My '85 had a V6.
|
Are you talking about a JDM Z31? That may be a possibility, but was never the case in the states. All US spec Z31's had VG30 blocks. You may have seen a Z31 engine swap or a JDM import. Please show any proof you have of a factory inline 6.
http://www.zonc.org/TechnicalInforma...owSticker.html http://www.z31.com/articles/4/1.jpg http://www.mikepallonenissan.com/zhistory/photo.htm |
I don't have any proof besides my word. I saw one in '94 when I was looking for a newer car. It was an ugly, light blue '84 Datsun 300zx with an inline 6. The owner was a real piece of work, so needless to say I didn't buy it. If it was a JDM import, I didn't know about it, and I'm sure the owner had no clue either. The car was in Fremont, CA. The only reason I remember it was because I though all of the Z31's had V6's. I was shocked when I popped open the hood and saw that IL 6 sittin' in there.
|
thanks for the correction. I obviously was typing to fast and left that part out.:p
But you are correct, both generations have V6's. I'll go back and correct my post. I'll even give you credit for the correction.:) |
I believe that you saw what you did. I had an 87 and an 84 parts car, so I'm speaking from experience as well. The chance of an imported Z31 in CA is better than most places. I was going off of your "Some, if not all of the '84 Z31's had inline 6's" comment.
My main point was about rizzspeed's thought that all Z31's had inline-6 engines. I read his post a few times to be sure I didn't misunderstand, if I have somewhere, I apologize. I don't want to give the impression i'm flaming anyone, just a simple correction. Gotta run back to the photo lab, I'm developing some nice B&W photos of my Z32:D |
The previous motor may have been blown and he may have swapped in a 280zx motor.
|
Well, when I think about it, I have only seen under the hoss of 1 '84 Z. So, to me, all of them had it. My statement was true, but only in my world. :D What EMO stated makes much more sense. The guy selling it was a complete twit. I don't know how common it was to import JDM Spec cars back then.
|
All times are GMT -7. The time now is 03:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands