ZDriver.com - Advancing your Timing

ZDriver.com (https://www.zdriver.com/forums/)

- 300ZX (Z32) Performance / Technical (https://www.zdriver.com/forums/300zx-z32-performance-technical-47/)

- - Advancing your Timing (https://www.zdriver.com/forums/300zx-z32-performance-technical-47/advancing-your-timing-2194/)

Synd	Jun 3, 2002 08:20 PM

Advancing your Timing

Just curious if anyone has advanced their timing on a non turbo 300zx yet? I have a 90 z with a 92 NA jspec engine and would like to advance the timing. Was curious if this would be ok on a non turbo z, how dangerous it is (more so then a common honda?), what I can expect, etc. I see the tech article on how to, was just curious about anyone's experiences! Thanks. Also what is the stock setting? 15 Deg.?

Only1Z

Jun 4, 2002 06:15 PM

Re: Advancing your Timing

Check the "Timing Tweak" article in the tech section on twinturbo.net.

http://members.aol.com/bbcoach34/ZDi...igs/mysig1.jpg

Synd	Jun 4, 2002 08:30 PM

Re: Advancing your Timing

I read it and it doesnt quite explain what I asked, also it doesnt say much about NA's. If all I have is a 10m socket and a screw driver and jsut wanna advance it a bit, what is a fair amount in MM ? 2 MM? Whats a degree as far as distance

All times are GMT -7. The time now is 09:50 PM.