300ZX (Z32) Forums Dedicated to 90-96 ZCars otherwize known as the Z32's

Video update of My Z

Thread Tools
 
Search this Thread
 
Old Aug 13, 2012 | 01:12 PM
  #1  
3riCJbOi's Avatar
Thread Starter
one sound fits all
 
Joined: Apr 2008
Posts: 134
Video update of My Z

Quick walk around and catback video of my 1991 Nissan 300Zx NA

Currently running on 19 inch staggered tuner wheels
Lowered on S-Tech Springs From Z1
Cross drill slotted Brembo rotors with 30mm Z32 Brake Calipers
Custom Catback with Z1 Test pipe and unknown aftermarket Headers (bought the car with it on ahaha)
JWT Intake from Z1 motorsports
Z1 motorsports 1-piece Platinum Driveshaft
Z1 light weight Flywheel with 6 puck ceramic Clutch Disc

<iframe width="560" height="315" src="http://www.youtube.com/embed/ilsO0ZhVDCM" frameborder="0" allowfullscreen></iframe>

<iframe width="560" height="315" src="http://www.youtube.com/embed/R0UqvCJk3yc" frameborder="0" allowfullscreen></iframe>

Last edited by 3riCJbOi; Aug 13, 2012 at 01:16 PM.
Old Aug 13, 2012 | 02:47 PM
  #2  
Rupe's Avatar
Horsepower Mathematician
 
Joined: Jul 2011
Posts: 571
From: Montreal, Canada
Looks and sounds good man. One question though: isn't that clutch a little overkill for an NA?
Old Aug 13, 2012 | 03:08 PM
  #3  
3riCJbOi's Avatar
Thread Starter
one sound fits all
 
Joined: Apr 2008
Posts: 134
Good question. At first I thought if I needed it but it made a hell of a different in torque and I bought the Clutch kit off a friend that was selling it for cheap. He had a Twin Turbo but sold it cause it got into an accident and had an uninstalled clutch kit and I bought it off him for cheap. Mind as well ahaha
Old Aug 14, 2012 | 09:30 AM
  #4  
Rupe's Avatar
Horsepower Mathematician
 
Joined: Jul 2011
Posts: 571
From: Montreal, Canada
Ah well a deal's a deal. At least if your drivetrain fails anywhere you know it won't be there.
Old Aug 15, 2012 | 10:27 PM
  #5  
Pearl White Z32's Avatar
Registered User
 
Joined: Aug 2012
Posts: 10
My 94 na doesnt say "fairladyz". can i replace mine for one?
Old Aug 16, 2012 | 12:59 PM
  #6  
Rupe's Avatar
Horsepower Mathematician
 
Joined: Jul 2011
Posts: 571
From: Montreal, Canada
Guess you could always try to find an old one. The new ones I've seen don't have any markings.
Old Aug 17, 2012 | 04:08 PM
  #7  
3riCJbOi's Avatar
Thread Starter
one sound fits all
 
Joined: Apr 2008
Posts: 134
Its actually a decal that i bought from Z1motorsports
only cost a couple bucks
Old Aug 18, 2012 | 08:09 AM
  #8  
Rupe's Avatar
Horsepower Mathematician
 
Joined: Jul 2011
Posts: 571
From: Montreal, Canada
This makes sense!
Old Aug 24, 2012 | 07:19 PM
  #9  
Pearl White Z32's Avatar
Registered User
 
Joined: Aug 2012
Posts: 10
Dude i broke my third brake light panel. i was going to paint it but failed to remove it. can i just super glue it and paint over that??
Old Aug 24, 2012 | 07:20 PM
  #10  
Pearl White Z32's Avatar
Registered User
 
Joined: Aug 2012
Posts: 10
Also, where you get your tail lights, my n/a doesnt have those
Old Aug 25, 2012 | 02:22 PM
  #11  
3riCJbOi's Avatar
Thread Starter
one sound fits all
 
Joined: Apr 2008
Posts: 134
I would probably just go buy a used one
you can find it at the junk yard or something
Its not a part that ppl would fight for
soo usually if you can find a Z at the junk yard it should still be intact
and those are USDM tailights the same one that you got but i coverted them to the 99 Jspec look.
I replaced the orange lens with clear lens and painted the housing silver
to match the jspec ones
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
n00blar
280ZX (S130) Forums
15
May 28, 2008 11:13 PM
RodMoyes
280ZX (S130) Forums
27
May 5, 2006 10:42 AM
Seraphic
300ZX (Z32) Forums
15
Apr 8, 2005 03:35 AM
Seraphic
300ZX (Z32) Performance / Technical
18
Apr 5, 2005 02:28 PM
ZR8ED
240Z, 260Z, 280Z (S30) Forums
0
Nov 13, 2003 07:27 AM




All times are GMT -7. The time now is 08:38 PM.