ZDriver.com

ZDriver.com (https://www.zdriver.com/forums/)
-   300ZX (Z32) Forums (https://www.zdriver.com/forums/300zx-z32-forums-7/)
-   -   Drive Belts (https://www.zdriver.com/forums/300zx-z32-forums-7/drive-belts-15600/)

napoleonzheking 11-06-2005 04:55 PM


Originally Posted by emo236
never replaced it, just delt with it. and that's good that you had a quiet tensioner.

You mean to tell me there were people out there who thought they had a failed timing belt tensioner and continued driving?!?!?!?!?!!?!?!?!?!?!?!?! Good god..... That explains alot about the info on where it's coming from....

86zMan, thats called belt dressing.... I use it to help isolate the right belt, but sometimes it will stop the problem all together...

91Zman 11-06-2005 04:58 PM


Originally Posted by napoleonzheking

86zMan, thats called belt dressing.... I use it to help isolate the right belt, but sometimes it will stop the problem all together...

i know but its a start, if it fixes it thats good, but if not then oh well.

i know what belt it is because when someone pushes the gas i can see the belt slipping.

emo236 11-06-2005 06:51 PM


Originally Posted by napoleonzheking
You mean to tell me there were people out there who thought they had a failed timing belt tensioner and continued driving?!?!?!?!?!!?!?!?!?!?!?!?! Good god..... That explains alot about the info on where it's coming from....

86zMan, thats called belt dressing.... I use it to help isolate the right belt, but sometimes it will stop the problem all together...

Read all the previous posts closely.....it's not actually failing, it just squeels.
"If you hear an annoying squeak from the front of the engine when the car is cold, its the timing belt tensioner. If it bugs you, buy another car or plan to change the timing belt early, $500 (including the tensioner, $250 without). The timing belt only needs to be changed at 60K miles. But, you have to take the timing belt off to replace the tensioner. It won't hurt to wait, it just makes an annoying noise for 5 minutes or so each time you start it. Nothing is actually broken."

napoleonzheking 11-06-2005 09:11 PM

if it's making an abnormal sound, it isn't operating correctly.... therefore needs to be investigated / checked out. And I knew if ANYTHING wasn't operating correctly on my car, ESPECIALLY when dealing with something as crucial as the timing belt.....

emo236 11-06-2005 11:07 PM


Originally Posted by napoleonzheking
if it's making an abnormal sound, it isn't operating correctly.... therefore needs to be investigated / checked out. And I knew if ANYTHING wasn't operating correctly on my car, ESPECIALLY when dealing with something as crucial as the timing belt.....

ok, I'd just rather listen to people in the Z community that have dealt with thousands of different Z's more so than people who have dealt with only a few or just one. I've heard differently from sources that I find to be more credible IMO. that's just where I'm coming from....now that we know where each other is coming from....can we just can the whole pissing contest.

Outkast 11-17-2005 07:13 PM


Originally Posted by napoleonzheking
timing belt tensioners don't squeel either.... it has nothign to do with the timing belt or related parts / accessories...

All the timing belt tensioner does is keep the timing belt tight. Let me provide an analogetic example.

OK, I work on Z's and many other types of vehicles all the time at the dealership I work at and you are wrong!! The TENSIONERS do squeel. After time the lube for the bearings in the tensioners wears away, this is why you should change them when you do a 60K tune up. The belt itself won't squeel cause it's a direct drive belt. Now if the accessary belts squeel it's cause they are slip drive belts and if they are loose you get the same sound, just smaller, as a tire in a fast takeoff and breaks loose.

Mechanical Engineering lesson over!!

Outkast 11-17-2005 07:19 PM

Also if you don't believe me, Go to a Nissan dealership. Ask a tech this question and if he doesn't know ask him to look it up on Assist under Symptoms; TSB/TIPS Anytime there is ANY regular problems on ANY of Nissans vehicles it is put on the Nissan Assist Network for all the Techs all over the world to compare symptoms and fixs.

napoleonzheking 11-18-2005 12:13 AM


Originally Posted by Outkast

Mechanical Engineering lesson over!!


A. The hydrolic tensioners are sealed units on the Z32, which mean the lube isn't going to "wear" away. Either the seal will fail and it will leak out, or the bearing will get too hot and it will solidify the grease inside. Not impossible for the lube to "wear" away, but there is a reason for it.
B. Bearings do not start squeeling, then usually stop.
C. Belts are normally temperature sensative, bearings aren't really bitchy about that.

Also, bearing and belt squeels have distinct different sounds. Not much of a difference of the loudness of them...

Oh yah.

D. why are you bringing up an old dead post? If you would of read, it was already established in the first 3 posts the problem was a drive belt. I"m curious now as to why a timing belt tensioner was even brought up.
E. my original statement of, you have people who've delt with THOUSANDS of Z's that still drove their Z's around with timing belt tensioners with, for the sake of Outkast's posts "failed bearings" in them and they didn't replace them... Having a hard time believing that still.

And just cause you "work on cars" doesn't mean you know what your talking about. A NISSAN dealership (you didn't even say if you worked at a Nissan dealership) here managed to EF my Z up pretty bad, and they "work on cars all the time."

*Fine Print* I reserve the right to be wrong, other people should too. I also reserve the right to think your head is up your ass, as for this thread, this is my last post on it because i outlined my point clearly enough for someone with IQ to understand the points that were made. (the original point being you can get drive belts from autozone that work just fine..)

emo236 11-18-2005 08:11 AM


Originally Posted by napoleonzheking
B. Bearings do not start squeeling, then usually stop.

You mean kinda like wheel bearings? ;)
Sorry, wasn't gonna post on this thread again, but outkast had something to say. Yes, you reserve the right to be wrong, and he does to be right sometimes. Be skepitcal, you should be, but I suggest researching what happens to a lot of Z's, not just your own.

91zxtt 11-18-2005 10:26 PM


Originally Posted by emo236
You mean kinda like wheel bearings? ;)
Sorry, wasn't gonna post on this thread again, but outkast had something to say. Yes, you reserve the right to be wrong, and he does to be right sometimes. Be skepitcal, you should be, but I suggest researching what happens to a lot of Z's, not just your own.

I guess anything is possible......like pigs flying out of my ass.

Please don't tell me that you think a wheel bearing and a belt tensioner bearing are even marginally similar.

Emo,...I think every person who has ever posted a question about squealing belts has gotten your response about the tensioner squealing. If a tensioner actually can make this noise; which I'm still saying it won't, unless maybe you put 300k miles on one, and since nobody here except you and Ludacris has ever actually heard it, don't you think that the accessory belts are a far more likely diagnosis???? Come on, you're a smart kid. Give people an answer that is most likely going to help them, not make them think that these cars are just repairs waiting to happen.

emo236 11-19-2005 07:19 AM


Originally Posted by 91zxtt
Please don't tell me that you think a wheel bearing and a belt tensioner bearing are even marginally similar.

I know, but I was hoping no one would point that out! He said "bearings" don't make noise, so I was poking fun at him since wheel bearings obviously do. haha. :p

Originally Posted by 91zxtt
Emo,...I think every person who has ever posted a question about squealing belts has gotten your response about the tensioner squealing. If a tensioner actually can make this noise; which I'm still saying it won't, unless maybe you put 300k miles on one, and since nobody here except you and Ludacris has ever actually heard it, don't you think that the accessory belts are a far more likely diagnosis???? Come on, you're a smart kid. Give people an answer that is most likely going to help them, not make them think that these cars are just repairs waiting to happen.

That's partially b/c of who I've heard it from. I respect what both Charles and Greg have to say when it comes to Z's. I mean, sure, you've torn your motor apart, and I've done maintenance, installed mods, and worked on other turbo cars more extensively and have helped guys in the club tear their motor down(watched and handed tools :p ), (none of this is what I'd call a bunch of experience, so I'm not going to know more than someone who has the experience) but Charles and Greg have both torn down and done just about anything imaginable to tons of VG30 motors. Especially Greg. Not only that, they actually design and make parts for the Z32. It's true, there's a little idolization (sp?) going on. :p On the other hand, you're right. It seems every time I've posted this answer on this forum, it's ended up being something else. (usually accessory belts)


All times are GMT -7. The time now is 10:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands