300ZX (Z32) Appearance Exterior, Interior Discussions related to body kits, accessories, interiors, window tinting etc.

what do u guys think about this wing?

Thread Tools
 
Search this Thread
 
Old Mar 13, 2005 | 11:35 AM
  #1  
2in-trbo-z32's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 25
From: Alexandria, VA
what do u guys think about this wing?

i believe both of these wings are Stillen type I, correct me if im wrong. ive been looking for the perfect wing for my Z32 for a long time now and i really like these. WHAT DO YOU GUYS THINK??
Attached Thumbnails what do u guys think about this wing?-300zx-wing.jpg   what do u guys think about this wing?-stillen-type-i.jpg  
Old Mar 13, 2005 | 11:54 AM
  #2  
Seraphic's Avatar
Loves The Asian Chicks
 
Joined: Oct 2004
Posts: 263
From: TN
personally, large spoilers dont look good on Zs. im either not getting one or if i ever have enough to spend, ill get the jspec.

Old Mar 13, 2005 | 01:06 PM
  #3  
Bryan Thompson's Avatar
Registered User
 
Joined: Mar 2005
Posts: 46
From: Greenville SC
wing

I agree with him/her if your gonna have a wing keep it low and streamline Z's are cars not air planes. People with Large wings need to go to the air port and stay off the road
Old Mar 13, 2005 | 02:06 PM
  #4  
dr. buddha's Avatar
Z Extreme Guy
 
Joined: Oct 2003
Posts: 673
From: reno nv
personly i like it. i have a f-40 wing that came with mine andim going to put a flat drag wing on mine and get rid of my f-40. but i like that one also.
Old Mar 13, 2005 | 05:30 PM
  #5  
2in-trbo-z32's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 25
From: Alexandria, VA
i like the way these wings look. i think the wing on the pic of the zdriver homepage fits perfect with the body lines of the Z32 its not too big and it goes below the roofline of the Z. however the ducktail dish type spoilers are nice too.
Old Mar 13, 2005 | 06:10 PM
  #6  
phrozen209's Avatar
Registered User
 
Joined: Jul 2004
Posts: 143
From: Waterford, CA, USA
im all the way with Seraphic; the only wing that will ever go on my car will be the jspec. too bad its $800!
Old Mar 13, 2005 | 06:28 PM
  #7  
RPS13_GZ32's Avatar
S13 or Z32?....decisions, decisions.
 
Joined: Feb 2005
Posts: 892
From: Reno, Nevada
i dunno, i personally like it, but the Jspec one sure looks clean.
Old Mar 13, 2005 | 09:20 PM
  #8  
91zxtt's Avatar
Registered User
 
Joined: Nov 2003
Posts: 3,672
From: Gerber, CA
The biggest wing I would conside putting on my car is the Stillen type III wing.

http://www.stillen.com/Sportscars_de...d=22874&page=2
Old Mar 13, 2005 | 09:47 PM
  #9  
My Fairlady Z's Avatar
Ruined By Spudz
 
Joined: May 2004
Posts: 856
From: East Wenatchee, Wa
Originally Posted by 91zxtt
The biggest wing I would conside putting on my car is the Stillen type III wing.

http://www.stillen.com/Sportscars_de...d=22874&page=2
Hehe, same here 91. It's what I have, and I don't like it on most Z's, but on my car for some reason it just looks right. Personally, I think it's because I had it chopped an inch so it wouldn't be as high.
Old Mar 13, 2005 | 10:04 PM
  #10  
v0va's Avatar
Russian Pimp
 
Joined: Jan 2005
Posts: 113
From: Chicago, IL
u should buy mine
Old Mar 13, 2005 | 10:59 PM
  #11  
bardabe's Avatar
Bad Speller
 
Joined: Sep 2004
Posts: 1,832
From: Moreno Valley, CA
the type III looks liek shisnads. and myne I finally gotrid off. it wastossed burnedand cremated. im gonna go JDM for sure.
Old Mar 14, 2005 | 01:52 AM
  #12  
RPS13_GZ32's Avatar
S13 or Z32?....decisions, decisions.
 
Joined: Feb 2005
Posts: 892
From: Reno, Nevada
I dunno, I don't know if i'd take the type III wing over the other one, i guess I'd have to see em both in person.
Old Mar 14, 2005 | 07:25 PM
  #13  
WhtFairLadyZ's Avatar
Registered User
 
Joined: Jul 2003
Posts: 372
From: Douglasville, Ga
Have u guys seen the carbon fibre wing that Unique autosports is selling in Austrailia?

http://uniqueautosports.com/pricelis...dhugewing3.jpg

Sorry for the lack of hyperlinkin
Old Mar 14, 2005 | 08:33 PM
  #14  
91zxtt's Avatar
Registered User
 
Joined: Nov 2003
Posts: 3,672
From: Gerber, CA
That's the ugliest wing I've ever seen. By far.
Old Mar 14, 2005 | 10:06 PM
  #15  
Zgringo's Avatar
El Viejo
 
Joined: Jan 2005
Posts: 204
From: San Felipe, Mexico
Originally Posted by WhtFairLadyZ
Have u guys seen the carbon fibre wing that Unique autosports is selling in Austrailia?

http://uniqueautosports.com/pricelis...dhugewing3.jpg

Sorry for the lack of hyperlinkin
Now that's one ugle friggin wing. I never though anyone could screwup a wing but they did.
Old Mar 15, 2005 | 02:11 AM
  #16  
RPS13_GZ32's Avatar
S13 or Z32?....decisions, decisions.
 
Joined: Feb 2005
Posts: 892
From: Reno, Nevada
Originally Posted by WhtFairLadyZ
Have u guys seen the carbon fibre wing that Unique autosports is selling in Austrailia?

http://uniqueautosports.com/pricelis...dhugewing3.jpg

Sorry for the lack of hyperlinkin

Thats it, screw my motor, i want to spend all that money to buy a plane ticket to australia just so i can slap someone in the face for that. F@#$ing wrong.

Last edited by Riz Z Speed; Mar 15, 2005 at 03:52 AM.
Old Mar 15, 2005 | 03:57 AM
  #17  
Riz Z Speed's Avatar
Administrative Brown Guy
 
Joined: Jun 2003
Posts: 5,406
From: Ontario, Canada
Those two wings in the first post are different from each other.
I like the first one. The first one has a slight slant backwards and isn't as high as the second one.
The second one just comes straight up from the hatch.
The stillen wing that 91zxtt linked to, no thanks.
I'm not liking the "droop over" design.
Those austrailian guys shouldn't be drinking Fosters when they design stuff.
Old Mar 15, 2005 | 10:31 AM
  #18  
SHWAZ300's Avatar
Registered User
 
Joined: Nov 2004
Posts: 129
From: PA
Personally i prefer the fairlady without a wing at all. Well because it reminds me a womans body and i LOVE those curves. But the rims on that first pic in this post, freaking AMAZING i want those on my Z.
Old Mar 15, 2005 | 08:08 PM
  #19  
My Fairlady Z's Avatar
Ruined By Spudz
 
Joined: May 2004
Posts: 856
From: East Wenatchee, Wa
It looks right on my car, maybe because I also have front and rear body kit??

- I would also take the Kaminari or TT wing over the J-Spec. The only reason everyone raves about it is because hardly anyone has it. Everyone has the JDM Front Bumper which is EXACTLY the reason I don't want the J-Spec. Been done too much, and you don't see my kit all too often because most people don't have the cashflow to buy it.
Attached Thumbnails what do u guys think about this wing?-zed.jpg  
Old Mar 15, 2005 | 11:40 PM
  #20  
ZXDude90's Avatar
Aqua Teen Hunger Force Fan
 
Joined: Sep 2004
Posts: 535
From: Smyrna, TN
Originally Posted by My Fairlady Z
It looks right on my car, maybe because I also have front and rear body kit??

- I would also take the Kaminari or TT wing over the J-Spec. The only reason everyone raves about it is because hardly anyone has it. Everyone has the JDM Front Bumper which is EXACTLY the reason I don't want the J-Spec. Been done too much, and you don't see my kit all too often because most people don't have the cashflow to buy it.
I have seen quite a few Zs with the Stillen kit. I was torn between that and Jspec. Jspec, Stillen and WW are about the only fascias that look good on the Z, I think. I chose the Jspec for the stock fit and look. BTW the Jspec wing doesn't seem to flow with the Zs body. I dunno, maybe it's just me It doesn't look all that bad though. Definitely not worth $800.
Attached Thumbnails what do u guys think about this wing?-jspec_05.jpg   what do u guys think about this wing?-jspec_06.jpg  

Last edited by ZXDude90; Mar 15, 2005 at 11:42 PM.
Old Mar 16, 2005 | 12:14 PM
  #21  
b300z's Avatar
caught the z fever
 
Joined: Jun 2004
Posts: 2,518
From: Lafayette, IN
i love the jspec.....knockoff

i dont care what anyone says, its stayin on
Old Mar 16, 2005 | 01:34 PM
  #22  
2in-trbo-z32's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 25
From: Alexandria, VA
Who Makes It?

can anybody identify the manufacturer of the wing posted on the first thread? the red 300 with the fender flares. i got this pic from http://www.neuralmotion.com/300zx/index.cfm but there is no info about mods done to the car. i think it might be a japanese wing but im not sure.
Old Mar 16, 2005 | 02:08 PM
  #23  
phrozen209's Avatar
Registered User
 
Joined: Jul 2004
Posts: 143
From: Waterford, CA, USA
Originally Posted by ZXDude90
I have seen quite a few Zs with the Stillen kit. I was torn between that and Jspec. Jspec, Stillen and WW are about the only fascias that look good on the Z, I think. I chose the Jspec for the stock fit and look. BTW the Jspec wing doesn't seem to flow with the Zs body. I dunno, maybe it's just me It doesn't look all that bad though. Definitely not worth $800.
aww man!! the jspec in those pics look sweet! I cant wait to get the jspec wing on my white pearl car too!!!
Old Mar 16, 2005 | 06:08 PM
  #24  
My Fairlady Z's Avatar
Ruined By Spudz
 
Joined: May 2004
Posts: 856
From: East Wenatchee, Wa
Originally Posted by b300z
i love the jspec.....knockoff

i dont care what anyone says, its stayin on
Yours looks more like a 94+ TT spoiler knockoff to me..
Old Mar 16, 2005 | 10:36 PM
  #25  
ZXDude90's Avatar
Aqua Teen Hunger Force Fan
 
Joined: Sep 2004
Posts: 535
From: Smyrna, TN
Originally Posted by b300z

i dont care what anyone says, its stayin on
Wasn't trying to knock your style man. As long as it's not a gigantic aluminum wing it's fine by me



All times are GMT -7. The time now is 04:42 AM.