ZDriver.com

ZDriver.com (https://www.zdriver.com/forums/)
-   300ZX (Z31) Performance / Technical (https://www.zdriver.com/forums/300zx-z31-performance-technical-227/)
-   -   News about the oil pump problem (https://www.zdriver.com/forums/300zx-z31-performance-technical-227/news-about-oil-pump-problem-18329/)

omniserv 05-10-2006 08:13 PM

News about the oil pump problem
 
I've posted info about this car on a few diff, threads. At first i was looking for a Turbo car to use as a donor car to convert my like new NA. Than I found a 85 Turbo car that's in very good condition but the engine had a knock in it. The car is to nice to junk.

I now have the car in my shop and have the engine out of it. The knock was indeed the rod bearings, not just 1 but 4 of the 6 were bad. The guy I got it from said he lost oil pressure and replaced the oil pump and when I ask him if he checked the bearings while he had the engine out he paused for a second and said he did. I took the pause as that he didn't really check them out.

I have found another Z to get a good block from it's a 86 that had a engine fire, but the block is good.

Just thought I'd pass this info along to you.

BTW this is a silver Z and has the Turbo graphics on the side along with some pin stripes. I have not had a chance to look around much, but does anyone know of a source to buy the graphics?

Thanks

Chris


All times are GMT -7. The time now is 07:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands