Wipers and heater fan connected?
Wipers and heater fan connected?
Hi all,
Both the wipers and the heater fan on my 1987 Turbo have stopped working, are they connected to a similar control unit - because when I slammed the driver's door shut - they both worked for a second??
Fuses are good, ground leads to body seem okay, seems like a bad connection or dodgy relay/control unit to me....but where?
Any help would ne much appreciated - thanks.
Both the wipers and the heater fan on my 1987 Turbo have stopped working, are they connected to a similar control unit - because when I slammed the driver's door shut - they both worked for a second??
Fuses are good, ground leads to body seem okay, seems like a bad connection or dodgy relay/control unit to me....but where?
Any help would ne much appreciated - thanks.
the blower on climate control ( you have if turbo)
the fan is inop on heat until the heater core gets to temp - then while your driving all of a sudden it blasts in your face - brilliant right ?
ecu for wipers too ,pretty sure it grounds it for the intermittent setting
the fan is inop on heat until the heater core gets to temp - then while your driving all of a sudden it blasts in your face - brilliant right ?
ecu for wipers too ,pretty sure it grounds it for the intermittent setting
Thread
Thread Starter
Forum
Replies
Last Post
300zx1990z32
300ZX (Z32) Performance / Technical
4
May 9, 2011 07:38 AM
bdp159
280ZX Performance / Technical
5
May 31, 2010 06:44 AM
skupy
300ZX (Z32) Performance / Technical
11
Nov 14, 2005 01:42 PM
Bookmarks



Loose connections to heater blower resistor - now fixed - thanks.





