|
Read Before Asking "how Do I Make My Na Faster?
very common question around here. here is your answer before you ask.
Originally Posted by johnzboy
Let me recall... NISMO cams, ported/polished heads, Pathfinder upper intake, 240SX throttle body, K&N cone air filter, MSA headers, 2.5" mandrel bent exhaust (from headers back), all non-essential drive belts removed, e-fan, fresh tune up w/timing advanced, and premium gasoline.
All I managed to accomplish was to move the engine's advertised HP from the flywheel to the drive wheels. The Dyno Results http://memimage.cardomain.net/member...4_123_full.jpg The N/A Engine http://img.photobucket.com/albums/v3...01_640x480.jpg |
REPOST!!!!!! n00b
chose one this one or THIS one https://www.zdriver.com/forums/300zx-z31-performance-technical-227/read-before-asking-how-do-i-make-my-na-faster-25562/ |
Originally Posted by snwbrderphat540
REPOST!!!!!! n00b
chose one this one or THIS one https://www.zdriver.com/forums/showthread.php?t=25562 |
lol WHY its in the same section one under Z31 general and one under technical. this isnt an airplane redundancy isnt a necesity
|
Originally Posted by snwbrderphat540
lol WHY its in the same section one under Z31 general and one under technical. this isnt an airplane redundancy isnt a necesity
|
4 year bump
|
Where's cruise control?
|
Anyone know which years Pathfinder I need to find for the upper intake?
|
Originally Posted by Nekrostatic
(Post 347291)
Anyone know which years Pathfinder I need to find for the upper intake?
https://en.wikipedia.org/wiki/Nissan_VG_engine#VG33E |
Help! I’m not sure how to start new thread.
hi guys, I am so sorry I am posting here. Can someone please help me. I need help with my transmission. So I need to find out what kind of transmission I have. It’s a 1987 z31, I just bought it. I notice when I put in 1st, it pops out, once it is in it stays in. Then I drive and notice same with 3rd gear, it stays out unless I hold the gear ver y hard time to enjoy the car. So what I did was took the boot off the stick where meet transmission and cleaned up a bit now my first goes in and stay it does not POP OUT WHEN I KET THE CLUTCH OUT. I tried to see if my car has short shifter I may believe previous owner have put one in. I can’t find correct transmission!!!!! Ughhhhh so there are only four bolts on top where it meets the stick and the transmission. I will post pictures if possible. PLEASE HELP OR HELP ME POST NEW THREAD IF POSSIBLE. :) here is what’s going on with car.https://cimg1.ibsrv.net/gimg/www.zdr...e25f02b862.png |
| All times are GMT -7. The time now is 07:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands