I haven't found them very important, but I thought about it tonight, and it's one of many things in my Z that just doesn't work... I've always been used to adjusting mirrors by hand.. if someone can help me figure out how to make mine work again, I'd appreciate it.

JD

 

first, make sure everything is plugged in.

 

Everything is (yes, I've already removed the center console, and checked the wiring harness through-out, they haven't worked since I've gotten the car. What next?

JD

 

This would be a good time to check all your fuses and replace the blown ones

 

Break out the multimeter and start checking for voltages and continuity. If it's not fuses, that's about the only way you're going to figure out what's going on.

 

Well... I went through the fuse panel and checked all the fuse slots, the empty slots have no contacts inside them, for my vehicle wasn't optioned with them. Though it doesn't help that I don't have an owners manual, or fuse panel door. I suppose you're right... I'll have to get out the voltmeter and start checking...

JD

 

you said nothing about removing the door panels and checking the connections there.

 

Well, the only connections that I dissconnected in the doors, are the little red "door open" lights. those are plugged up now, I have not removed the mirror fixture, because I don't want to break it. Next step?

JD

 

you have to disconnect the wiring before you can remove the mirrors. try looking