280ZX Performance / Technical Discussions related to Turbo charging, Supercharging, Engine, ECU, exhaust, and etc. performance enhancements.
Sponsored by:
Sponsored by:

Please somebody help me:

Thread Tools
 
Search this Thread
 
Old Apr 12, 2007 | 07:19 AM
  #26  
14922zx's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 20
Talking

i have no idea what went on there,i am like you, don't want go there either. he has got last buck from me,i am thying to find a way to pay him back for his deeds. Thanks 14922ZX
Old Apr 23, 2007 | 06:42 AM
  #27  
Grabo2u's Avatar
Registered User
 
Joined: Apr 2007
Posts: 16
From: TN
Sounds just like mine!

Been working on the same problem for a couple weeks, I even took it to a Nissan dealer and after 4 hours they still had no idea as to what was wrong!

I'm running out of things to check and or replace:
Filters
Plugs wires cap rotor
IC & adjusted Air Gap
Coil
AFM
TPM
FPR
Sensors
Cleaned every electrical connector
PVC
Checked all the vaccumn lines
I even called it every nasty name I could think of and still nothing!!

LMK if you find the problem.

Grabo2u
Old Apr 23, 2007 | 04:22 PM
  #28  
Grabo2u's Avatar
Registered User
 
Joined: Apr 2007
Posts: 16
From: TN
Think I found the problem, I HOPE!

Took out the distrubitor today, turned it upside down and stuff started falling out! As I started taking it apart I found pieces of the magnet pick-up assembly missing, I also found out the vacuum advance wasn't working, ordered a replacement let you know when it arrives and I put it in.

Grabo2u




All times are GMT -7. The time now is 02:10 AM.