|
www.zspecgarage.com
Ok guys, it's not much. Yet. But it's worth a quick look if you got a few spare seconds. Please check out my site and be sure to use the link to respond.
Thanks to everyone who has been supportive thus far and I'll keep you guys up to date. http://www.zspecgarage.com Thanks again Jason Williams Zspec Garage info@zspecgarage.com |
I sent you an email.. You know im in!!! :D
|
Should I get my shop idea off the ground, I'd be more than happy to be your West-Coast distributor. I'm already planning to advertise ya. :D
Can't wait to see the final products (both parts and the site). |
Originally Posted by Dorifto
Should I get my shop idea off the ground, I'd be more than happy to be your West-Coast distributor. I'm already planning to advertise ya. :D
Can't wait to see the final products (both parts and the site). |
Haha ... frustrated? Sounds a lot like the LS6-powered Chevette in the next county up from me.
I want to open a performance speed shop. I'd like to specialize in: -Drifting performance and tuning -Autocross performance and tuning -Touge (mountain road grip & drift) performance and tuning -High-speed vehicle performance and tuning (Wangan and Zero-Yon style) -Z-cars and parts -Rotary-powered vehicles / performance Basically ... "If the check clears, I'll do it." ... first items on the list are an all-wheel-drive Dynojet dyno, and a couple lifts. I know a bit about custom engine management (MegaSquirt, Electromotive, Haltech, etc.) and wiring, so I'd like to offer some sort of tuning and programming service. In the future, I'd like to import cars and parts from other countries - mainly Australia and Japan.
Originally Posted by s/cL3.0
I wanna start a different kind of car dealership. Just sell custom sleepers.
I will most likely get my start from buying older imports and suping them up - you know, older Preludes, MA70 Supras, Celicas, Z31s, other miscellaneous Hondas, Toyotas, Nissans, and the like. Pretty much what everyone has for sale around here, but nobody wants to buy stock. Maybe some machining, if I can get the tools for cheap - something like custom brackets and fasteners. I already have a bit of a setup going building cat-back and racing exhausts for some friends of mine. Within the next month or two, I'll be fabbing a 2.5" system on a friend's '05 Sentra 1.8S Limited, and a cat delete-pipe for a friend's Tiburon. |
Originally Posted by Dorifto
Haha ... frustrated? Sounds a lot like the LS6-powered Chevette in the next county up from me.
I want to open a performance speed shop. I'd like to specialize in: -Drifting performance and tuning -Autocross performance and tuning -Touge (mountain road grip & drift) performance and tuning -High-speed vehicle performance and tuning (Wangan and Zero-Yon style) -Z-cars and parts -Rotary-powered vehicles / performance Basically ... "If the check clears, I'll do it." ... first items on the list are an all-wheel-drive Dynojet dyno, and a couple lifts. I know a bit about custom engine management (MegaSquirt, Electromotive, Haltech, etc.) and wiring, so I'd like to offer some sort of tuning and programming service. In the future, I'd like to import cars and parts from other countries - mainly Australia and Japan. Nice. That would be straight up sweetness. I will most likely get my start from buying older imports and suping them up - you know, older Preludes, MA70 Supras, Celicas, Z31s, other miscellaneous Hondas, Toyotas, Nissans, and the like. Pretty much what everyone has for sale around here, but nobody wants to buy stock. Maybe some machining, if I can get the tools for cheap - something like custom brackets and fasteners. I already have a bit of a setup going building cat-back and racing exhausts for some friends of mine. Within the next month or two, I'll be fabbing a 2.5" system on a friend's '05 Sentra 1.8S Limited, and a cat delete-pipe for a friend's Tiburon. |
The day draws nearer guys, and gals if there are any in attendance. I just got approved for a loan that will cover my cost for the initial supplies I need to make the first few hoods.
Someone had mentioned they wanted gelcoated items. Well I've decided to forgo the gel coat on exterior pieces. I'll explain. Gel coat does four things: 1) PRovides a protective barrier against UV exposure. 2)Gives a high gloss finish 3)Adds WEIGHT! Alot of it. $4)Adds cost, which means you pay more. I guess two outta four ain't bad. I've decided to go with a clear coat instead. Why? It also provides UV protection. It also provides a high gloss finish, of matte, or whatever finish you want. And last of all, it don't weigh a damn thing and costs less than gelcoat because I use less of it (not because it's a cheap paint)! That's four outta four, much better. Select items I choose can be gelcoated. Anyways, it shouldn't be too much longer now before you see before you some pics of final products that you can purchase. Oh, and to Dorifto and s/cL3.0, you both got a couple emails coming your way here soon. Still working on the site. |
Oh and s/c, email the info on those lifts, I'll be needing a lift or two. That's a hell of a price.
|
A friend steered me toward www.gesusa.com
Garage Equipment Supply ... tools, lifts, compressors ... you name it. Well, no dynos though. :D I'll be talking with DynoJet within the month to see what it would cost me to lease one of their 248C Double-Rollers. |
Thanks Dorifto.
|
Originally Posted by Dorifto
A friend steered me toward www.gesusa.com
Garage Equipment Supply ... tools, lifts, compressors ... you name it. Well, no dynos though. :D I'll be talking with DynoJet within the month to see what it would cost me to lease one of their 248C Double-Rollers. |
Hey jfairladyz, it's JR, I will be starting those drawings a mentioned in my last e-mail within the week. I'll get one sketched up of my hood idea also. If the price is right, it's yours. :cool: J/K ;)
|
I already shot you an email back.
Thanks again guys. |
Oh and I've come up with the ultimate weight reduction idea.
You ready for this one? Carbon Fiber windshields. I'm taking orders for these now. Carbon Fiber Engine blocks are in the works now too. If you don't think these are such great ideas, then maybe thats why I need all you guys sending me ideas. I can't read minds. Or can I? In fact I know exactly what all of you are thinking right now as you read this. How bad you want those carbon windshields. Freaky huh? |
Originally Posted by jfairladyz
Oh and I've come up with the ultimate weight reduction idea.
You ready for this one? Carbon Fiber windshields. I'm taking orders for these now. Carbon Fiber Engine blocks are in the works now too. If you don't think these are such great ideas, then maybe thats why I need all you guys sending me ideas. I can't read minds. Or can I? In fact I know exactly what all of you are thinking right now as you read this. How bad you want those carbon windshields. Freaky huh? |
Come on guys ... let's give some input! :D You all know you want something in CF, but are too afraid to say it ... come on ... here, I'll start.
CF mirrors, center console, dash cover, T-tops, glovebox door ... I can go on and on. :D |
Best deal I've found on lifts and free shipping too! I got the XL-9X so it clears doors easy and it fits in my garage with the door rolled up! I didn't see the XL-9X for sale on the gesusa.com website, but asedeals.com has the wide 9X version for nearly $200 less then the narrow XL-9 on the gesusa.com website... Have fun! |
Everyone knows they want carbon t-top shades, a-pillars, b-pillars, rear hatch, fenders, and those windows, man why waste money on tint, I want those real bad!! :D
|
Why not just make the whole car out of CF? How much do you think that would cost?
|
Originally Posted by DoTheDrew888
Why not just make the whole car out of CF? How much do you think that would cost?
|
Originally Posted by lessthanjabo
hah, not much... maybe around 30 bucks tops... :D
|
Make it out of sheet metal. It'll be more sturdy in a strong wind. If only I could find some sheet metal body panels.
|
Originally Posted by BleachZee
Make it out of sheet metal. It'll be more sturdy in a strong wind. If only I could find some sheet metal body panels.
p.s. I will be updating my gallery tonight WATCH OUT. project 450WHP |
Carbon Fiber don't dent. And it'll survive a mild impact without cracking or shattering. Anything that would constitute replacing a CF panel would probably put a metal one into retirement as well. Don't be fooled by the cheap CF most companies use, or the shit that's draped over fiberglass. The stuff I use is 4x4 Twill Weave. Only one layer for a hood. Add Nomex and you're talking a hood you can literally jump up and down on without flex. Otherwise I use a Carbon Frame structure. Latch and hinge areas are also reinforced with extra carbon.
And just so everybody knows, I'm starting the molds for the hoods in a couple of weeks. A mold then takes two weeks before it can be put into comission for continual use. Parts take about a day, sometimes less, depends on the temp. So start saving the paychecks. It's almost time to put those Z's on a healthy diet. No solid price yet, but they'll be less than what I've researched pure, race weight Carbon hoods going for. I've seen them all the way up to $1K. Ouch. Those must be shipped in gold plated crates. |
Oh and s/c, hit me up when you get that gallery updated.
|
| All times are GMT -7. The time now is 03:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands