Toyota Calipers

Reply Subscribe

Thread Tools

Search this Thread

Feb 23, 2001 | 09:06 AM

GodZilla

Thread Starter

Banned

Joined: Dec 2000

Posts: 7,727

From: CA

Toyota Calipers

I had reciently installed the toyota caliper upgrade on the front of my z but after bleading my brakes they still are real spongy. Has anyone encountered this while doing the upgrade?

Also, just to make sure is the bleed screw suppose to be at the top or the bottom. (just need verification)

Kyle

Feb 25, 2001 | 01:20 PM

rusty

Registered User

Joined: Feb 2001

Posts: 72

From: Georgia

Re: Toyota Calipers

I did the same swap on my car; the bleed screws are on top. Did you replace the brake hoses? I hear steel braided lines will firm up brake feel.

Feb 25, 2001 | 10:15 PM

Drax240z

Guest

Posts: n/a

Re: Toyota Calipers

Mine are really firm. Bleed screws on top, make sure you follow the correct bleed procedures.

Also, you can adjust the pedel height underneath the dash. Not sure if you are having problems with that as well.

My suggestion is to bleed the brakes and the master cylinder some more.