ZDriver.com - Front control arm bushings

ZDriver.com (https://www.zdriver.com/forums/)

- 240Z, 260Z, 280Z (S30) Forums (https://www.zdriver.com/forums/240z-260z-280z-s30-forums-9/)

- - Front control arm bushings (https://www.zdriver.com/forums/240z-260z-280z-s30-forums-9/front-control-arm-bushings-5070/)

zpeedracer25

04-04-2003 07:46 PM

Front control arm bushings

Hey all,
I just need a quick technical question answered. I am installing the energy suspension front control arm bushings. One side of the bushing is thicker then the other...to offset for caster I think. Which side does the thicker/thinner go on? The old bushings were absolutely hammered and didn't appear to be offset.
Thanks

sethmarx

04-07-2003 11:09 PM

Had the same prob, my trusty Haynes Manual shows the control arm offset to the front. My bushing kit had two piece bushings for the front so the thicker one goes toward the back. have fun:)

auxilary

04-08-2003 11:42 AM

thicker towards the back

zpeedracer25

04-08-2003 02:38 PM

Thanks guys. I already installed them that way. I was 90% sure thats how they were supposed to go.

All times are GMT -7. The time now is 03:14 AM.