ZDriver.com - Converting from flat tops in 260Z

ZDriver.com (https://www.zdriver.com/forums/)

- 240Z, 260Z, 280Z (S30) Forums (https://www.zdriver.com/forums/240z-260z-280z-s30-forums-9/)

- - Converting from flat tops in 260Z (https://www.zdriver.com/forums/240z-260z-280z-s30-forums-9/converting-flat-tops-260z-7860/)

SPL310

12-12-2003 05:13 PM

Converting from flat tops in 260Z

I've got a set of SUs so I can replace the flat tops in my 260Z, and I've got a few leads on the linkage I need for the carbs. However, I haven't been able to find a real clear diagram or photo of how the linkage is connected. Any online source for such a diagram or photo?

auxilary

12-12-2003 10:00 PM

http://www.carfiche.com/s30/?2:b:1

SPL310

12-14-2003 06:06 PM

Thanks for the link! It was a big help, as well as raising another question:

What is the difference between the flat top linkage and the round top one? They look pretty similar to this total newbie....

david lisiecki

12-14-2003 07:39 PM

Flat tops

Look at the picture of my engine posted in photo gallery. I is one of 3 behind a shot of my new konig wheels.. You will see pretty good detail reagarding the carbs with the exception of the short link from the top to the trottle link between the carbs..

All times are GMT -7. The time now is 05:40 PM.