Carter 4070 Electric Fuel Pump for 3 screws su carburetors
#1
Carter 4070 Electric Fuel Pump for 3 screws su carburetors
Recently purchased a couple of Airtex 8012SX which advertise as 5.5 to 9 psi. Once plumbed into the fuel lines when measuring the PSI before the carbs, the fuel pressure gauge reads 3.2 psi. I guess this company must be going through quality control issues:
https://www.summitra...8012s/overview/
I was recommended a Carter 4070LP fuel pump:
https://www.summitra...p4070/overview/
Will this pump provide a steady 4 to 4.3 psi??? I just dont want to be wasting money and effort on cheap non feasible electric pumps
https://www.summitra...8012s/overview/
I was recommended a Carter 4070LP fuel pump:
https://www.summitra...p4070/overview/
Will this pump provide a steady 4 to 4.3 psi??? I just dont want to be wasting money and effort on cheap non feasible electric pumps
Thread
Thread Starter
Forum
Replies
Last Post
Mark
240Z, 260Z, 280Z (S30) Forums
3
04-08-2012 03:30 PM
skupy
300ZX (Z32) Performance / Technical
11
11-14-2005 01:42 PM
Fast240Z
240Z, 260Z, 280Z Performance / Technical
1
05-20-2005 12:25 PM
Bookmarks