|
Datsun 240Z - 1971 Blue Metallic 903 - Resto
Hi,
"Here I go again" like the Whitesnake song says...but this time with a 71 240Z. Some of you remember me for the LB110 restoration in Mr.Vitorino shop here in Portugal, well, he had a dicease and return to work a month ago the reason for this restoration project is starting now. I will put some pictures and insert some comments. The Z, it's a beautiful lady but the previous owner ruined it if we talk about what's original according the year and what's not. This will be a difficult task but I'm prepared for the challenge. My Z is a 71 and it's like a 73... Yesterday I left the Z with Mr.vitorino and next week the resto will begin. We've inspected the car and found the usual rust on the model, it's not bad and has excellent mechanic, good for me...Let's see how far I can go returning this Z. Hope you enjoy the topic. Now the first pictures... Regards, Mário https://s3.postimg.org/a9q63l9er/image.jpg Z in Mr.Vitorino shop, last photo before the work... https://s3.postimg.org/uc4fzyoyr/IMG...731_151509.jpg https://s3.postimg.org/6wmium57n/IMG...731_151810.jpg https://s3.postimg.org/fu78ryxnn/IMG...731_152304.jpg https://s3.postimg.org/qkuvdnbab/IMG...1_152305_1.jpg https://s3.postimg.org/jf34b7277/IMG...731_152616.jpg The last run... https://s3.postimg.org/q9df0vuub/205...37693842_o.jpg https://s3.postimg.org/kazlqnbvn/205...12553085_o.jpg https://s3.postimg.org/6vcl173dv/205...71163474_o.jpg https://s3.postimg.org/rcxjcufhf/206...59858366_o.jpg We were making some marks in the panel that should be covered. Perhaps relays and some stuff...lot's of holes... [img(1000px,749px)]https://s3.postimg.org/vi8fyrd9f/IMG_20170731_154521.jpg[/img] Mr.Vitorino leading the operation... https://s3.postimg.org/md4oimz8j/IMG...731_154658.jpg The rubbers are completely wasted, I will put new ones. The scutcheons will return to it and the same will happen to the center bumper. All the 73 details will disappear... https://s3.postimg.org/9a91zd90j/IMG...731_154735.jpg https://s3.postimg.org/vapefzroj/IMG...731_154740.jpg The spolier and rear is in the wrong colour, I guess it's charcoal... https://s3.postimg.org/oya965omb/IMG...731_160018.jpg Some rust, not really important... https://s3.postimg.org/ghaqv8jxf/IMG...731_160846.jpg On this side of the car I was expecting more rust..,but seems fine for now!!! https://s3.postimg.org/7njue4wyr/IMG...731_160848.jpg I will change the colour to the original one too, charcoal, the same as the rear and rear spoiler Soon I'll have more pictures... |
Hi everybody!
I’ve got some news and that’s why I’m here again. Last Tuesday I went to Mr.vitorino shop and started do dismantle the Z…honestly I thought it was a dificult task, but it wasn’t…well, only in some little details. The ca ris in excellent shape as photos will show…I guess this car was restored or deep painted some years ago. Next week We’ll have at least one door rebuilt, below the doors and inside need some intervention. Here are some photos… Rear window acquisition…the car has the horizontal defrost lines and aren’t the correct…I found one vertical and job done…a few years ago I bought one in the USA and came broken…never bought or find anoter one..they are getting rare this days!!! https://s2.postimg.org/hu2glwwe1/IMG...17-_WA0001.jpg https://s2.postimg.org/8nk5ymr5l/IMG...17-_WA0002.jpg The beggining… https://s2.postimg.org/ie39004jd/IMG...822_113325.jpg Door parts ready for the treatment…Nickel plating https://s2.postimg.org/87z8ur9ix/IMG...822_121948.jpg Rear floor…not bad!!! I got scared, but fortunately the brown zone is glue…no rust… https://s2.postimg.org/pzav97oxl/IMG...822_145042.jpg Door ready for Mr.Vitorino! https://s2.postimg.org/788xz1ud5/IMG...822_145047.jpg Original floor carpet…but has to be removed!!! https://s2.postimg.org/7astlvy0p/IMG...822_145100.jpg Rear luggage accomodation in excelente shape https://s2.postimg.org/dyuh5lnuh/IMG...822_145457.jpg https://s2.postimg.org/y2e3hnfuh/IMG...822_145706.jpg |
And now the surprise…the original blue…It can only be seen on some detailed parts..this is one!
https://s2.postimg.org/o3t4v66ex/IMG...822_145709.jpg Replacemente tyre floor…not bad…no rust… https://s2.postimg.org/v6vydo5ix/IMG...2_150304_1.jpg https://s2.postimg.org/9qzowumex/IMG...822_150307.jpg The seats will be rédone, but I will only take care of the parts that are completely off… https://s2.postimg.org/dxkjc6m0p/IMG...152256_HDR.jpg No plastic cover…but I have 2 here…offered by a mate!!! https://s2.postimg.org/sadzai60p/IMG...152309_HDR.jpg Passenger side floor…the usual…46 years and some bad treatment…the reason…the jack tool…but Mr.vitorino said that’s a part to be redone… https://s2.postimg.org/5keuhimt5/IMG...152452_HDR.jpg https://s2.postimg.org/uszob6rqx/IMG...153337_HDR.jpg https://s2.postimg.org/vrg1dh52x/IMG...153339_HDR.jpg https://s2.postimg.org/xohcvsl4p/IMG...153340_HDR.jpg Drivers side floor…the usual again…but this one has no concerns…ist’s 75% good…a little intevention. By the end we will apply some Soundproofing board to avoid rust and noise. https://s2.postimg.org/8l0absni1/IMG...153348_HDR.jpg https://s2.postimg.org/wnh46o455/IMG...153401_HDR.jpg https://s2.postimg.org/uo0if99tl/IMG...153408_HDR.jpg My helper keeping all the bolts in place! https://s2.postimg.org/s98muttkp/IMG...153836_HDR.jpg Under the plate no surprises!!!! https://s2.postimg.org/447xd49a1/IMG...153840_HDR.jpg https://s2.postimg.org/4jj764v7d/IMG...154032_HDR.jpg Datsun logo temporarily off… https://s2.postimg.org/5zupo9y49/IMG...154301_HDR.jpg In my opinion this s the exact moment to restore the car…it has some details that need intervention, and now that he has no rust holes and unrestorable parts the process will be much easier. Hope you like it…next week some more news!!! Regards Mário |
Hi again.
On the last two weeks Mr.Vitorino worked on other projects and on the last days he worked in the Z. He started with the doors, and at first they seem in pretty nice shape...but then he found some clues on bad reparations years ago. With this he decided to separate the door panel from the structure and he was right, they need some intervetion. Tons of rust and event the protetion layer was completely cracked. This week I hope he finishes at least one door, because on Thursday I'm going to the shop. Meanwhile, the electric system was rebuilt and is now tunned for 1971, I'm talking about the rear plate lights. Let's see the pictures,,,and like I said...this was the correct moment for this Z... https://s25.postimg.org/ru7l57bu7/IM...921_160359.jpg https://s25.postimg.org/wvez6fltr/IM...921_160403.jpg https://s25.postimg.org/jfryh7ijj/IM...921_160405.jpg The interior as Mr. Vitorino suspected...passenger door. https://s25.postimg.org/lkcbi0233/IM...921_160545.jpg https://s25.postimg.org/co1jeg1an/IM...921_160507.jpg https://s25.postimg.org/quha9pmgf/IM...921_160549.jpg https://s25.postimg.org/6zv8np9un/IM...921_160505.jpg Drivers door with the same aspect... https://s25.postimg.org/3vkkqf8cf/IM...921_160552.jpg https://s25.postimg.org/vx37i4q8f/IM...921_161224.jpg https://s25.postimg.org/6fksyflbz/IM...921_160649.jpg https://s25.postimg.org/9z6qob0xb/IM...921_161225.jpg https://s25.postimg.org/6fksyi5xb/IM...921_160651.jpg |
And based in this suspections we have decided to make a full reparation of the doors. Next photos are from the passenger door. Door panel and interior panel removed.
I believe these were the worst parts of this car, and I'm aware of the rust on the front and rear arches and I think I'll be lucky. https://s25.postimg.org/xq64698sf/IM...921_160655.jpg https://s25.postimg.org/6fksy839r/IM...930_222734.jpg https://s25.postimg.org/bs9nctwgf/IM...930_222745.jpg https://s25.postimg.org/jl0b4txan/IM...930_222757.jpg https://s25.postimg.org/yv06bw31r/IM...930_222909.jpg https://s25.postimg.org/65dafa1mn/IM...930_223110.jpg https://s25.postimg.org/jz1n4chdb/IM...930_223105.jpg https://s25.postimg.org/cvtroq47z/IM...930_222917.jpg https://s25.postimg.org/x4h5a0vov/IM...930_223115.jpg Hope you are enjoying this resto...next week some more news! Regards Mário |
Hi again!
Here I am with some fresh news and photos. The metal work is on a great speed and this week the doors were finished. This week I think the rear and cowl grill will be finished too. The doors gave us some trouble and we had to send them to sandblast to clean the metal, not the panel, but the interior. By the end a new panel was used. The drivers door was in bad shape, worst than the passenger side. On Saturday we remove the symbols, rear spoiler and rear lights. Only the bumper remain. I hope the rear and front are better than the doors… Let’s see the photos! Doors and interior separated… https://s1.postimg.org/9fzw8yd13z/IM...014_120350.jpg https://s1.postimg.org/3cywwnlwy7/IM...014_120358.jpg Doors ready. The green painting is a spray to protect the metal for the rust. https://s1.postimg.org/4985qa5yjz/IM...014_120449.jpg https://s1.postimg.org/4flutduizz/IM...014_120500.jpg https://s1.postimg.org/13fwd62w7j/IM...014_120536.jpg https://s1.postimg.org/7w0xzn1o9b/IM...014_120548.jpg https://s1.postimg.org/1slxbd22of/IM...014_120604.jpg https://s1.postimg.org/2dvkxnulj3/IM...014_120725.jpg |
Mr.Vitorino looking for some rust…ahahahah
https://s1.postimg.org/7ik113vo4v/IM...014_120823.jpg This was a corner of one door…tons of rust… https://s1.postimg.org/1iomajwnbz/IM...014_121355.jpg https://s1.postimg.org/55u5y2ukzj/IM...014_121400.jpg Under the cowl grill the scenery is good. I was a little bit worried about it…true..but Mr.Vitorino said that’s ok…the surprise is next… https://s1.postimg.org/3s7mu1fvsf/IM...014_143516.jpg https://s1.postimg.org/5yjstzb9i7/IM...014_143518.jpg Under the grill… https://s1.postimg.org/93mjer9o8f/IM...014_143605.jpg https://s1.postimg.org/8icvsgonfz/IM...014_143632.jpg |
The grill had to high pointson both sides, like a screw, but…it wasn’t what we thought…
Somebody before had covered the rust on the panel with iron mass and hammered the rust point down. With time the mass began to crack…and the result was this… https://s1.postimg.org/696mn4thof/IM...014_143752.jpg https://s1.postimg.org/566xc968fz/IM...014_143753.jpg https://s1.postimg.org/3eqpvivizj/IM...014_143741.jpg https://s1.postimg.org/4hdns8hf4v/IM...014_143756.jpg https://s1.postimg.org/62g65vk9zz/IM...014_143759.jpg https://s1.postimg.org/24nsp7em9b/IM...014_143800.jpg Mr.Vitorino immediatly started to work and found tons of rust! https://s1.postimg.org/1942nxa5sf/IM...014_143901.jpg https://s1.postimg.org/66cjhrs7wv/IM...014_144204.jpg All this marerial, like a spounge, hide the rust! https://s1.postimg.org/3c9e4bbopr/IM...014_144205.jpg Hi again! Here I am with some fresh news and photos. The metal work is on a great speed and this week the doors were finished. This week I think the rear and cowl grill will be finished too. The doors gave us some trouble and we had to send them to sandblast to clean the metal, not the panel, but the interior. By the end a new panel was used. The drivers door was in bad shape, worst than the passenger side. On Saturday we remove the symbols, rear spoiler and rear lights. Only the bumper remain. I hope the rear and front are better than the doors… Let’s see the photos! Doors and interior separated… https://s1.postimg.org/9fzw8yd13z/IM...014_120350.jpg https://s1.postimg.org/3cywwnlwy7/IM...014_120358.jpg Doors ready. The green painting is a spray to protect the metal for the rust. https://s1.postimg.org/4985qa5yjz/IM...014_120449.jpg https://s1.postimg.org/4flutduizz/IM...014_120500.jpg https://s1.postimg.org/13fwd62w7j/IM...014_120536.jpg https://s1.postimg.org/7w0xzn1o9b/IM...014_120548.jpg https://s1.postimg.org/1slxbd22of/IM...014_120604.jpg https://s1.postimg.org/2dvkxnulj3/IM...014_120725.jpg |
Again the original blue and the rear door in excellent shape!!! No intervention needed!
https://s1.postimg.org/5izlg94773/IM...014_160409.jpg https://s1.postimg.org/612ej0885r/IM...014_160412.jpg https://s1.postimg.org/9h4qb3s5lb/IM...014_160743.jpg My homework is now recover the symbols and clean some parts. https://s1.postimg.org/9okpkp4b5r/IM...014_160623.jpg https://s1.postimg.org/3nzs1t4hmn/IM...014_160631.jpg Mr. Vitorino trying to get the rear lights…not an easy task! https://s1.postimg.org/6bp8c5j5zj/IM...014_160415.jpg Hope you enjoyed the photos. Next weekend I’ll try to get some more! Regards Mário |
Hi folks,
I’ve got some more news! Yesterday I’ve been in Mr.Vitorino garage, and I found my Z with another 2 parts finished. The cowl rill and the rear. This means that soon he will be repairing the floors and front, I believe in one month for the metal work and then painting. Soon I’ll take out the engine and gear-box to make the treatment and finish the metal work. I’ve already started to separate some parts for the chrome and some to recover at home. The cowl grill had to be redone in the extremities but now the part is new. And the rear was our big problem!!! The rear lights have never been removed and all the bolts were in bad shape, some we had to waste because were corroded. Let’s see the photos for you to see all the advances! This was redone because of the rust on the rear. The worst part was above the lights. https://s1.postimg.org/5mhtg9sbf3/IM...101_111431.jpg https://s1.postimg.org/9rdesdbrnz/IM...101_111428.jpg This part was severe…but now rédone! https://s1.postimg.org/9ttglrak27/IM...101_111000.jpg https://s1.postimg.org/6ll5f9khpb/IM...101_111011.jpg The cowl grill is redone now… https://s1.postimg.org/1b8j1295hr/IM...101_111543.jpg https://s1.postimg.org/554j5uksv3/IM...101_111519.jpg https://s1.postimg.org/3uc3778gb3/IM...101_111522.jpg https://s1.postimg.org/5frcz0867z/IM...101_111535.jpg https://s1.postimg.org/1ibqwi60q7/IM...101_111559.jpg And again the original blue in two separated parts of the car. https://s1.postimg.org/38bmuqh7vz/IM...101_111438.jpg https://s1.postimg.org/1lilg1h87z/IM...101_112311.jpg My Homework… https://s1.postimg.org/68gzux2cun/IM...101_122830.jpg Hope you have enjoyed the photos and the work until now! Next week more news! Regards Mário |
Wow! Very impressed!!! Excellent work!
|
Hi everybody,
After one month break, the works have returned. Today we have been dismantling the sidewings, grill, lights, bumpers and soo n. All went well, but srews are evil…I hate them a lot…some broke and were in hard position to took. Until now I was on the Z book searching just for the srews. I want them new!!!1 I thought the Z was na easy car do disassemble, but it isn’t!!! Too many tricks. This week the works go to the sides of the car as you’ll see on the pictures! Hope you still like them! A ViZit…eheheh https://s10.postimg.org/cwv9gs8qx/IM...127_131040.jpg Hood, bumper and grill…no difficulties… https://s10.postimg.org/z8t2a8sg9/IM...127_132445.jpg The grill https://s10.postimg.org/544lovv2x/IM...7_133157_1.jpg https://s10.postimg.org/7y7r2c4yx/IM...127_134907.jpg https://s10.postimg.org/9d9br2drt/IM...127_135517.jpg https://s10.postimg.org/tkmrjdiyx/IM...127_135521.jpg Then surprises… The original paint showed up again… https://s10.postimg.org/ua5jvqr89/IM...127_132524.jpg The super horns…I don’t even know what model they belog…not Datsun for shure! https://s10.postimg.org/yja9xupbt/IM...127_132536.jpg And it looked like this… https://s10.postimg.org/tkmrjdiyx/IM...127_135521.jpg Side wings and lights..major problems with the screws…horrible!!! All went rust and some broke!!! The surprise… https://s10.postimg.org/8c931owpl/IM...127_150616.jpg https://s10.postimg.org/xv1fepvp5/IM...127_163122.jpg https://s10.postimg.org/5uxbufzyh/IM...127_163112.jpg |
What a big hole…
https://s10.postimg.org/cy57a1pyh/IM...127_163132.jpg https://s10.postimg.org/434czhyl5/IM...127_163136.jpg https://s10.postimg.org/4fvr5mbp5/IM...127_163143.jpg The battery corner is rusty too… https://s10.postimg.org/lt61kl1w9/IM...127_163117.jpg All stripped… https://s10.postimg.org/n87m9bap5/IM...127_160556.jpg Right side in good shape…needs a cleaning…but srews are evil…more than an hour… https://s10.postimg.org/56ohbgqy1/IM...127_163320.jpg https://s10.postimg.org/fgqwap1e1/IM...127_163317.jpg Superficial rust…some luck here!!! https://s10.postimg.org/skwgne15l/IM...127_163228.jpg https://s10.postimg.org/n9hk2nrxl/IM...127_163231.jpg https://s10.postimg.org/jpvmcohg9/IM...127_163248.jpg https://s10.postimg.org/ucpfi4cqx/IM...127_163252.jpg Down the door is possible the worst part of the right side. https://s10.postimg.org/rvdoaudex/IM...127_163303.jpg Some appointments to do…nothing special! https://s10.postimg.org/gj12t7x21/IM...127_163218.jpg https://s10.postimg.org/hy2nhray1/IM...127_163207.jpg We took the car to the lifter to check all the issues we discovered…well…need deep metal work on the left side! https://s10.postimg.org/p1aixvvyh/IM...127_165104.jpg https://s10.postimg.org/vezm14lex/IM...127_165108.jpg |
Left side…
https://s10.postimg.org/my03pmvzd/IM...127_165220.jpg https://s10.postimg.org/qt3hsrkg9/IM...127_165617.jpg https://s10.postimg.org/68ynu9p9l/IM...127_165810.jpg https://s10.postimg.org/vezm13b49/IM...127_165837.jpg https://s10.postimg.org/4h5oze8hl/IM...127_165116.jpg https://s10.postimg.org/jee5zw655/IM...127_171601.jpg https://s10.postimg.org/w5sc6fas9/IM...127_171604.jpg Right side… https://s10.postimg.org/5jfvhxbvd/IM...127_165202.jpg https://s10.postimg.org/fus8a28k9/IM...127_165850.jpg~ These wings just need cleaning work! https://s10.postimg.org/rvdob7nt5/IM...127_163521.jpg https://s10.postimg.org/jee5zw655/IM...127_171601.jpg https://s10.postimg.org/w5sc6fas9/IM...127_171604.jpg https://s10.postimg.org/esi1rjsbt/IM...127_172122.jpg https://s10.postimg.org/r74trwmex/IM...127_172126.jpg https://s10.postimg.org/d0p2wo3u1/IM...127_172254.jpg And this last photo for today…bolts with story…46 precisely…but very stubborns Hope you enjoyed the work so far… NismoPick: Thanks a lot! I think Mr.Vitorino is one of the best here in Portugal! Has made my B110 from the zero and now the Z... Regards Mário |
Amazing work, excellent project. What a great Z! Congratulations! :006:
Obrigado! |
Hi everybody...
another week and some more work to show...some surprises, the usual I think and some really bad news...hey after all she's 47... Today I went Mr.Vitorino shop only to check the work and see what parts and pieces are in need for the next couple of weeks. During the week we talked each other on the phone...always bad news...welll...ain't that bad...I think... The good news are the fenders, they are now ready to fix the car...they were in good conditionsm only where the bolts screw were interventionated. Then all the passenger floor was re-done, the exception is in the back, small rust to clean, notheing to worry. The bad news, the passenger floor completely ruined...I was really impressed, never thought of it!!! And it looks like someone had done some previous work too. Now I've to buy the entyre part. The water channel was started too and a hand-made part will substitute it, We took the engine and gearbox and nothing to worry, even the fireguard is in excellent condition...amazing but it is...Now we've to recover the colours for the air filter and engine. I'll make some work on it this week...let's see what happens. Let's check the photos... Arriving the shop... https://s10.postimg.org/mtsjroyuh/IM...203_122258.jpg Passenger side...done...the exception is in the place where Mr.Vitorino has his hands. https://s10.postimg.org/qc4joluqx/IM...203_114605.jpg https://s10.postimg.org/8aleqal55/IM...203_114623.jpg https://s10.postimg.org/5gi9cuqop/IM...203_115830.jpg https://s10.postimg.org/5gi9cuqop/IM...203_115830.jpg Driver's side...ruined...but behind the seat rails is excellent...really odd... https://s10.postimg.org/6611pgbvd/IM...203_114748.jpg https://s10.postimg.org/tk911k9a1/IM...203_114932.jpg https://s10.postimg.org/shyuj3qhl/IM...203_114935.jpg https://s10.postimg.org/5t9njjgtl/IM...203_114937.jpg https://s10.postimg.org/af5rrrzqx/IM...203_114942.jpg https://s10.postimg.org/4e82uskvd/IM...203_115007.jpg This is in excellent shape https://s10.postimg.org/4e82usd5l/IM...203_115041.jpg |
Fenders ready fot the painting...
https://s10.postimg.org/uzalqfuzd/IM...203_120253.jpg https://s10.postimg.org/y7f3351q1/IM...203_120302.jpg https://s10.postimg.org/7z3ydsrx5/IM...203_120328.jpg https://s10.postimg.org/jo7y1r3g9/IM...203_120421.jpg https://s10.postimg.org/h6w6uhr9l/IM...203_120430.jpg Chanel on work... https://s10.postimg.org/mib3fhvfd/IM...203_115524.jpg The front needs some attention...nothing serious...I think! https://s10.postimg.org/737gyk0ax/IM...203_121405.jpg https://s10.postimg.org/p60jpjynt/IM...203_121357.jpg Now another discovery...the original blue again... https://s10.postimg.org/494bkznt5/IM...203_120030.jpg https://s10.postimg.org/p26q97lft/IM...203_120018.jpg https://s10.postimg.org/ff37zqsix/IM...203_115513.jpg Engine and gearbox...nothing to worry...luckily,,, https://s10.postimg.org/juln51und/IM...203_121555.jpg https://s10.postimg.org/p60jpjynt/IM...203_121357.jpg https://s10.postimg.org/j52usfu15/IM...203_150537.jpg https://s10.postimg.org/moosi94gp/IM...203_150543.jpg And that's it for now!!! https://s10.postimg.org/737gy8v2h/IM...203_150617.jpg This week I'll have some more news... Hope you enjoy it!!! zxguy1986: thanks a lot. This week it will be a tuff week...many metal work to do...let's see what happens!!! Hope in the end all went well!!! Regards Mário |
13 Attachment(s)
Hi everybody!
It seems all imagens were lost…It might be a problem on postimage…really don’t know…I’ll start from last works on car. It’s been raining hard these days in Portugal, and the cold didn’t allowed Mr.Vitorino to work on the car because of his desease…but we are back… The news…the car will be to the paint shop within 2 weeks…and next week will be finished for shure! It’s just take out the windshields, brake pump and clutch pump, fuel tank and all the tubes!!! But now the work on the car… New floor…just one side was needed…an not all… Attachment 21670 Preparint to cut… Attachment 21671 It was ruined… Attachment 21672 Attachment 21673 New one… Attachment 21674 Finishing it… Attachment 21675 The ledt side just needed some labour on the back, because the front was already done! Attachment 21676 Attachment 21674 The original colour…very cool!!! Attachment 21678 All the front finished Before, but with some treatment by the time… Attachment 21679 And ready…. Attachment 21680 There was missing a part here,,,Mr.Vitorino made a new one! Attachment 21681 Things to do… Attachment 21682 |
15 Attachment(s)
And we all star the mechanical part…new parts arrive…
Attachment 21655 Attachment 21656 Attachment 21657 Attachment 21658 Attachment 21659 Attachment 21660 Attachment 21661 Attachment 21662 Meanwhile they arrive and put in place… Attachment 21663 Attachment 21664 Cleaning parts… Attachment 21665 I need a new fuel pump…but i think Ican get one new…I haven’t search for it! Attachment 21666 Electric system waint to be revised,,, Attachment 21667 MR.Vitorino completely exhaust… Attachment 21668 See you nest week…Z Attachment 21669 Hope you enjoyed it…next week I’ll put some more upgrades! Regards Mário |
Hi again!
On the last 3 weeks we have finished the Z…it’s so nice to see the car ready to paint…there are some minor details to solve, but not metal work, only disassemble some parts. These weeks were hard…every time we thought the car was done another hole and rust appeared, so we decided to clean the metal until the last bit of paint…I’m talking about the floor…damn…completely rusty….now is new… The engine is in the rebuilding process and I haven’t got pictures…maybe next week… Meanwhile is just waiting for the paintig day. Windows, fuel lines and brake lines will be removed within 15 days! Hope you enjoy the progresso….let’s see the photos! https://preview.ibb.co/nekrr7/IMG_20180424_110711.jpg https://preview.ibb.co/kgTpdn/IMG_20180424_150406.jpg https://preview.ibb.co/gRUjB7/IMG_20180424_152128.jpg https://preview.ibb.co/mTBaJn/IMG_20180424_161036.jpg Floor…no words… https://preview.ibb.co/mhWEB7/1524566613872.jpg https://preview.ibb.co/bV35Jn/IMG_20180424_122851.jpg https://preview.ibb.co/gc7AjS/IMG_20180505_105839.jpg Final result…so nice!!! https://preview.ibb.co/iydi4S/IMG_20180505_165431.jpg Behind the seats… https://preview.ibb.co/exR9dn/IMG_20180425_113219.jpg https://preview.ibb.co/cCiY4S/IMG_20180425_113228.jpg Front floor and the battery frame…the battery flame will be fixed tomorrow…but it seems long time ago someone made a repair on it! https://preview.ibb.co/jkLkJn/IMG_20180424_163110.jpg https://preview.ibb.co/cwbQJn/IMG_20180425_152124.jpg Someone open a hole…crazy maniascs…so…let’s cover it… https://preview.ibb.co/k83Br7/IMG_20180424_144836.jpg https://preview.ibb.co/nbKUdn/IMG_20180505_160924.jpg Gone… https://preview.ibb.co/f6u1r7/IMG_20180505_162814.jpg |
The mudflaps holes were covered too…they will no longer be used…
The back of the car was in bad shape too…minor dents…but needed some repair!!! https://preview.ibb.co/bzTxyn/IMG_20180505_155441.jpg https://preview.ibb.co/hxURr7/IMG_20180505_164108.jpg https://preview.ibb.co/c5H1PS/IMG_20180505_165423.jpg No holes….yeah!!!! https://preview.ibb.co/eKYajS/IMG_20180505_171318.jpg Now some photos… The oil pan is in great shape, just needs to be painted grey…the colour is not bad…. https://preview.ibb.co/nHBvjS/IMG_20180425_115851.jpg Mr.Vitorino focused… https://preview.ibb.co/fervjS/IMG_20180425_143849.jpg No doubts…903 blue… https://preview.ibb.co/njE4dn/IMG_20180505_155418.jpg Warriors relax… https://preview.ibb.co/dPE4dn/IMG_20180505_171338.jpg https://preview.ibb.co/d3hPdn/IMG_20180505_172909.jpg Now we will wait 15 days…and deliver it for painting… Hope you still enjoying it!! Regards Mário |
Hi,
I'm back with fresh news! Here is the car after the painting job!!! It looks awesome!!! I'm very happy with the results!!! The colour is the original...I´m waiting for the final result!!! https://i.postimg.cc/ncCn8KYL/443330...66287360-n.jpg https://i.postimg.cc/xdy2G6Y6/443444...14566656-n.jpg https://i.postimg.cc/26kf0nSr/445360...42045440-n.jpg https://i.postimg.cc/hvhRBgmY/IMG-20181023-WA0000.jpg The comparison... https://i.postimg.cc/zfksH3SM/IMG-20181019-WA0007.jpg Regards Mário |
Hi, here I come again with fresh news!
This weekend we made a new up-grade on some parts, and finally we start the assembling…slowly, but started… During the last week, I got most of the important parts to assemble the car, parts like bolts kit, rubbers kit, details for doors and some engine bay parts. I’ll make a list as lonf as we will put them on the car. Most parts are original and the aftermaket ones are excelente quality, Today Mr.Vitorino woke me up at 8:00 o’clock… - Hey, where are you???? - I’m sleeping…jump off the bed and come immediately to work on the car!!!! And so I did…ehehehehe A stubborn bolt…it broke when we dissemble the engie…but Mr.Vitorino saved the day!!! https://i.postimg.cc/Zn9smsdT/IMG-20181114-114024.jpg https://i.postimg.cc/Pqt6J5wV/IMG-20181114-114418.jpg This is the resulto of the sandblast and metalization…this part is not ended yet, it will be painted with high temperature paint. https://i.postimg.cc/bJr30VLQ/IMG-20181117-170610.jpg This was missing part for the gearbox… https://i.postimg.cc/zfjcFgN1/IMG-20181114-112410.jpg New parts arrival and some care on organization! https://i.postimg.cc/6pxbs05X/IMG-20181117-120156.jpg Center console up-grade https://i.postimg.cc/xTzpF7Q5/IMG-20181117-143117.jpg My car is a second series from March 1971, but the previous owner changes some details, and the center console was one of them. I bought a series II to make this up-grade to make the car as much original I can. This console is much more attractive than the other…I’m extremely happy with the final result. [img]0https://i.postimg.cc/sf80mzk1/IMG-20181117-143115.jpg[/img] Even the leather pattern has small disserences… https://i.postimg.cc/63bbDxTj/IMG-20181117-125946.jpg And this is the beginning…the first part that goes to the car…the exterior chrome trims… Mr. Vitorino cleaning them with a moisture to make them bright. https://i.postimg.cc/XvQsC6Kj/IMG-20181117-150317.jpg https://i.postimg.cc/cJ9VNnbB/IMG-20181117-150557.jpg And the final result…applied on car… https://i.postimg.cc/SxLTmMJz/IMG-20181117-145756.jpg https://i.postimg.cc/DZSRfzVk/IMG-20181117-151024.jpg https://i.postimg.cc/9MsKDjV4/IMG-20181117-151146.jpg Hope you enjoy this weekend work…next week will have more news…we will strat with the rear end! Regards Mário |
Hi!
Today I’ll show some up-grades on details and new parts I got installed. Next week I’ll be on Christmas holidays and then the assembling continue with another rhythm. We have some interior parts, and the rear windows…what a trouble…ahahaha….rubbers and more rubbers…I’m exhausted…ehehehe Let’s move on… New parts on the rear…Mr.Vitorino changing the washers to the new parts. https://i.postimg.cc/TPq1X1Ct/IMG-20181205-105200.jpg https://i.postimg.cc/2jX6YP7N/IMG-20181205-105227.jpg Then we move into the gas cap…not finished yet…need the cover plated…will arrive soon. https://i.postimg.cc/ZqcbMg5g/IMG-20181205-115827.jpg https://i.postimg.cc/Yq5CGYPX/IMG-20181205-115835.jpg The vin plate… https://i.postimg.cc/xTJd1t6J/IMG-20181205-121316.jpg Now the interiors…they are the original ones. I decide to use them because they are part of the car and Loved the result… https://i.postimg.cc/bw1NQdcq/IMG-20181208-111844.jpg https://i.postimg.cc/Y9CrK34S/IMG-20181208-111846.jpg https://i.postimg.cc/28ZzD35n/IMG-20181208-111848.jpg https://i.postimg.cc/D0W7mwPk/IMG-20181208-111855.jpg https://i.postimg.cc/mZqbJ7Tb/IMG-20181208-111857.jpg The kick panels got installed too. Mr.Vitorino just polished them…what a result!!! https://i.postimg.cc/d3zwCc57/IMG-20181208-111908.jpg https://i.postimg.cc/zGw8yMKB/IMG-20181208-111914.jpg https://i.postimg.cc/85cSnz3J/IMG-20181208-121556.jpg https://i.postimg.cc/fW33VzLR/IMG-20181208-121611.jpg |
| All times are GMT -7. The time now is 11:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands