Introduce yourself
#1
Introduce yourself
This thread will be used to formally introduce yourself to the rest of the Vegas 350Z club. To keep it simple I have devised a guidline for people who don't want to read long paragraphs. So I will use my introduction as an example...
Mike Bonanni
2003 Chrome Silver Track Model
Injen CAI, Kinetix V4 Plenum, Kinetx HF Cats, Injen Exhaust, UR Crank Pulley, Tien Coilovers, 350EVO Sways, Kirk Roll Bar, Corbeau Seats & Harnesses, RH Racing 19" wheels, Nismo replica body kit, + many more little things.
I like to track race more than anything, but I also enjoy autocross and drag racing.
Mike Bonanni
2003 Chrome Silver Track Model
Injen CAI, Kinetix V4 Plenum, Kinetx HF Cats, Injen Exhaust, UR Crank Pulley, Tien Coilovers, 350EVO Sways, Kirk Roll Bar, Corbeau Seats & Harnesses, RH Racing 19" wheels, Nismo replica body kit, + many more little things.
I like to track race more than anything, but I also enjoy autocross and drag racing.
#2
Hey i think i have seen your 350z hear in clovis new mexico off MABRY DRIVE BY BENDER HONDA NISSAN ? have u been hear ?
1982 280zxt 2+2 , 5 speed , custom made k&n air intake made by me. RFL Blow off valve 60mm 240sx throttle body , Jsk Fuel rail ,Ngk Irduim spark plugs, Polished valve cover ,Polished FUEL rail , Polished J pipe ,polished thermostate houseing,Faze air to fuel gauge, Faze 30 psi boost gague , Pilot " D " type sterring wheel Custom made cd player bezel made by me , Russell stainless steel bradied brake and clutch lines, Apexi 3.5 inch turbo exhaust , manual boost controller 10 psi. high temp coated brake calipers blue, rotors high temp painted blue, umm more cutom work to come !
1993 nissan 300zx n/a 2+2 auto tranny , K&N FPIK intake, Custco Front and rear sway bars, brembo drill sloted rotors F & B , Stainless Steel test pipes, Megan Drag racer 2 Exhaust, Optima Red Top Battery NGK IRIDUIM Spark plugs 18 inch ADR CYPHER WHEELS 18x8 front 18x9 back..
Ken-
to have gone from Ford to nissan z was the best move i have ever made
1982 280zxt 2+2 , 5 speed , custom made k&n air intake made by me. RFL Blow off valve 60mm 240sx throttle body , Jsk Fuel rail ,Ngk Irduim spark plugs, Polished valve cover ,Polished FUEL rail , Polished J pipe ,polished thermostate houseing,Faze air to fuel gauge, Faze 30 psi boost gague , Pilot " D " type sterring wheel Custom made cd player bezel made by me , Russell stainless steel bradied brake and clutch lines, Apexi 3.5 inch turbo exhaust , manual boost controller 10 psi. high temp coated brake calipers blue, rotors high temp painted blue, umm more cutom work to come !
1993 nissan 300zx n/a 2+2 auto tranny , K&N FPIK intake, Custco Front and rear sway bars, brembo drill sloted rotors F & B , Stainless Steel test pipes, Megan Drag racer 2 Exhaust, Optima Red Top Battery NGK IRIDUIM Spark plugs 18 inch ADR CYPHER WHEELS 18x8 front 18x9 back..
Ken-
to have gone from Ford to nissan z was the best move i have ever made
Last edited by nismo619; 10-22-2006 at 07:09 PM.
#3
Originally Posted by nismo619
Hey i think i have seen your 350z hear in clovis new mexico off MABRY DRIVE BY BENDER HONDA NISSAN ? have u been hear ?
#5
Originally Posted by Nforce1
Isnt it a little late for this thread lolol
#6
Hi, I'm Rob, and I have been addicted to my Z for over 2 years now.
It started out with a simple JWT Pop Charger.
03 Chrome Silver Base Model
APS Single Turbo
Stoptech Stage 2 upgrade
Hotchkis sway bars
RS*R TI2000 Springs
Borla Exhaust
APS Plenum
Zeitronix gauges
Stillen Series 2 Fascia (soon to reappear after repainting and grille work)
Yokohama Advan track tires
Goodyear Eagle FI GSD3 street tires on 18" Privat Fahren wheels
Upcoming:
APS Exhaust
APS Strut Bar
Big Brake Kit (TBD)
Coilovers
2nd Job
New pictures once my bumper is reinstalled.
It started out with a simple JWT Pop Charger.
03 Chrome Silver Base Model
APS Single Turbo
Stoptech Stage 2 upgrade
Hotchkis sway bars
RS*R TI2000 Springs
Borla Exhaust
APS Plenum
Zeitronix gauges
Stillen Series 2 Fascia (soon to reappear after repainting and grille work)
Yokohama Advan track tires
Goodyear Eagle FI GSD3 street tires on 18" Privat Fahren wheels
Upcoming:
APS Exhaust
APS Strut Bar
Big Brake Kit (TBD)
Coilovers
2nd Job
New pictures once my bumper is reinstalled.
#7
Brian Smith
03 Performance
Nellis AFB
19" Axis Hiro | Toyo Tires | Aasco Performance flywheel | INGs+1 NSPEC | Stillen CF hood | Injen SES | Injen CAI | Z-Enterprises ground wires | KJR crank pulley | Kinetix V4 plenum-HF cats | B&M shifter | Custom sub box |10" Rockford Fosgate P2 | Rockford Fosgate 3002
03 Performance
Nellis AFB
19" Axis Hiro | Toyo Tires | Aasco Performance flywheel | INGs+1 NSPEC | Stillen CF hood | Injen SES | Injen CAI | Z-Enterprises ground wires | KJR crank pulley | Kinetix V4 plenum-HF cats | B&M shifter | Custom sub box |10" Rockford Fosgate P2 | Rockford Fosgate 3002
#8
Originally Posted by Smittyz33
Brian Smith
03 Performance
Nellis AFB
19" Axis Hiro | Toyo Tires | Aasco Performance flywheel | INGs+1 NSPEC | Stillen CF hood | Injen SES | Injen CAI | Z-Enterprises ground wires | KJR crank pulley | Kinetix V4 plenum-HF cats | B&M shifter | Custom sub box |10" Rockford Fosgate P2 | Rockford Fosgate 3002
03 Performance
Nellis AFB
19" Axis Hiro | Toyo Tires | Aasco Performance flywheel | INGs+1 NSPEC | Stillen CF hood | Injen SES | Injen CAI | Z-Enterprises ground wires | KJR crank pulley | Kinetix V4 plenum-HF cats | B&M shifter | Custom sub box |10" Rockford Fosgate P2 | Rockford Fosgate 3002
Wow, I love your Z... Im surprised Ive never seen you around!!
#9
I'm pretty new to this forum, so I never met any of you guys (excepy you ZRO ). I will be at the outing on 1 November though. Can't wait to see some of the other Zs in town!
#11
Mike Vasseur
NAFB
2004 LS Track
I like sunsets, puppies and long walks on the.....er...wait.....that's my wife....
um...I like to do artwork, play videogames and work on computers and cars...(if I had more tools).
The rest is in my sig....
NAFB
2004 LS Track
I like sunsets, puppies and long walks on the.....er...wait.....that's my wife....
um...I like to do artwork, play videogames and work on computers and cars...(if I had more tools).
The rest is in my sig....
#12
Sig
Kenny Richardson
Old (compared to you guys)
Henderson
Native Las Vegan
04 CS Roadster Touring
Stillen Dual Exhaust|K&N CAI|Crawford CAts|Crawford Plenum|U&R Pulleys|
350EVO Throttle Body|Technosquare reflash (twice)|Stillen Ground Wires|
Brake Pro Rotors with Ebs Pads| A few body mods.
\
Old (compared to you guys)
Henderson
Native Las Vegan
04 CS Roadster Touring
Stillen Dual Exhaust|K&N CAI|Crawford CAts|Crawford Plenum|U&R Pulleys|
350EVO Throttle Body|Technosquare reflash (twice)|Stillen Ground Wires|
Brake Pro Rotors with Ebs Pads| A few body mods.
\
#23
Just introducing myself, my name is mike. me and my wife are most likely going to move to vegas/henderson in february. its nice to see there is a group of Z's out there. i just picked up my SS track a couple weeks ago. previous car was a turbo charged acura rsx-s (stolen). well i look forward to meeting you all.
#25
Originally Posted by pope
Just introducing myself, my name is mike. me and my wife are most likely going to move to vegas/henderson in february. its nice to see there is a group of Z's out there. i just picked up my SS track a couple weeks ago. previous car was a turbo charged acura rsx-s (stolen). well i look forward to meeting you all.