L28 AND L28ET PARTS NEW USED AND AFTERMARKET!!!!!!!!!!!!!!!!!!i!!!!!!!!

[Spyder Z 15]

OK my shell is sold and now all I have is Engine parts. All prices do not include shipping. All item are sold as is with no warranty implied. Brand new Ross pistons *7.5comp ratio* w/Shotpeened and polished factory 280Z rods w/ARP rod bolts *has surface rust on rods* $650 /obo -Sold Brand new Nissan Motorsport intake and exhaust valves $200/obo -Sold Brand new L28ET turbo exhaust manifold $175/obo Used L28ET exhaust manifold with T4 adapter $100/obo -Sold Brand new MSD 6BTM 6462 ignition box, brand new 8.5mm wires, and brand new msd 2 blaster coil- $350 shipped -Sold 84 n/a Z31 ECU $50/obo -Sold Z31 distributor $50/obo -Sold Set of stock L28et pistons and rods $75/obo -Sold Stock L28ET crank $75/obo -Sold Bare early N42 head which appears to be port matched to intake manifold $75/obo Bare early L28 block which appears to be bore to 87mm. $50/obo *will not ship this. Must pick up locally* Full late L28E long block (no manifolds) *needs broken head bolt removed and probably rings. Missing 2-3 headbolts also* -pending sale L28 Turbo valve cover $50/obo. Good for powdercoating core. Small grind mark for old strut tower bar Unknown brand lightweight flywheel $150/obo -Sold Starter $30/obo Alternator $30/obo Slightly disassembled stock 280ZX turbo with gpopshopturbo rebuild kit $120. Some bolts need to be drilled out of housing. Had to cut a few off N42 intake manifold with slight bore in runners. Smoothed hump off myself $50/obo Unknown grind cam $50/obo *requires spray bar* Stock L28 valves used $30/obo used L28 rocker arms $10/obo Used stock Supra intercooler $50/obo-Sold Some misc piping which appears to route above i/c $25 *not guaranteed to be every piece, but looks to be.* Package deal with supra i/c $65 +shipping -Sold And a lot more misc stuff in a box Note-*Some items may have some surface rust on them due to prev owner leaving out in elements, but have been stored in a garage for the past year. Pics of parts can be found here http://s158.photobucket.com/albums/t117/Sweet72Z/ Any questions can be answered via PM, email, or you can call my cell. My email is Dustin.G.Plamondon at kp.org *replace at with @*, My cell phone number is 951-203-8222. Car is located in Moreno Valley, CA. Thanks for looking.

[snwbrderphat540]

6.5 compression ratio pistons? but why?!?1?! and didnt you post this already or am i nuts?

[Spyder Z 15]

Previous owner was going to throw massive boost at it. What you saw before was my whole car and parts selling as a whole, but I sold the shell to my buddy and now have a ton of parts. I tried to edit that thread, but the title wouldn't change for the main page so I didn't bump it and started a new thread.

[snwbrderphat540]

coolio just wonderin. and yeha 6.5 is still soooo low. even for massive boost, almost makes it loose its point lol. oh and any idea on the weight of the flywheel?

[Spyder Z 15]

I think it's like 10lbs or something. It's hard to get to right now to check because I just put a table saw I got for free at a garage sale in front of my only path in my garage. Lol. It definitely needs to be cleaned and maybe resurfaced.

[NismoPick]

Originally Posted by Spyder Z 15

Unknown grind cam $50/obo *requires spray bar*

There should be some markings (stamped) on the cam. I'm in need of a turbo one. Can you look @ the cam & tell me what is on it?

[Spyder Z 15]

Originally Posted by NismoPick

There should be some markings (stamped) on the cam. I'm in need of a turbo one. Can you look @ the cam & tell me what is on it?

Luckily I tried to figure this out a while ago and asked on hybridz but didn't really get any help.
The info stamped onto the body of the cam was E30 and japan. On one of the ends it says "moon-256" and under that "reg 60-74" or maybe "reg 60-94".
FYI- It also needs to be cleaned from a little surface rust from some severe rain we had here a while ago.

[Spyder Z 15]

I'm retarded, the CR for the pistons is 7.5 not 6.5.
http://s158.photobucket.com/albums/t...t=IMGP0121.jpg

[snwbrderphat540]

that sounds MUCH better. still pretty low though. lol.

[kmerten]

new MSD ignition box
new MSD Coil
new MSD spark plug wires
are these items still for sale? Email me at Kmerten@juno.com
sorry i just noticed you got back to me on zcar thanks i will get back to you on them.

[260zturbo]

ross pistons forged and are they still for sale?

[Spyder Z 15]

260Z-turbo. I do believe the pistons are forged. 1 of them has a little nick on it because it fell off my bench. Ever since I have had them laying on a towel in a drawer in my tool box. I did keep the original cardboard with the specs that was on the box. I had TonyD from hybridz look at it and he said it affects nothing and it was still in good shape. Rings would be included also. I'll take more pics for you if you like, when I do to my garage tommorrow.

kmerten- Yeah I got your post on zcar. If you email that email address I won't get it until monday cause I'm not back to work until then. I'm going to try to dig up more info on those also. A couple of people needed more info so I'll get it to you. Just email me there and I'll get back to you 1st thing monday morning. I'll try to post the info I get tommorrow on zcar tommorrow evening too.

[260zturbo]

yea im interested can you take some more pics and show a couple of the little nicks

[Niku-Sama]

Originally Posted by Spyder Z 15

Luckily I tried to figure this out a while ago and asked on hybridz but didn't really get any help.
The info stamped onto the body of the cam was E30 and japan. On one of the ends it says "moon-256" and under that "reg 60-74" or maybe "reg 60-94".
FYI- It also needs to be cleaned from a little surface rust from some severe rain we had here a while ago.

a moon cam shaft, i havent seen one of those in a long time.
i guess they no longer make any though
https://www.mooneyesusa.com/Store/in...651c4e1c386ffc

might shoot em an e-mail, see what they know, or to even see if it truly is a moon shaft.

on a side note these are kinda cool
https://www.mooneyesusa.com/Store/pr...651c4e1c386ffc

[Spyder Z 15]

Originally Posted by 260zturbo

yea im interested can you take some more pics and show a couple of the little nicks

Definitely. I'll take a bunch for you this afternoon and load them up tommorrow morning.

[Spyder Z 15]

PM's sent to 260zturbo, snwbrderphat540, and an email and PM to kmerten.

[Spyder Z 15]

I appologize to everyone for the MSD stuff, but the price has changed on it once I realized what I actually have. This is the MSD box for turbocharged vehicles and retails for way way more than what I was asking. I'm looking to sell all MSD items as a whole and I'm asking $350 shipped for all of it now. I'll probably start listing some of this stuff on ebay as well. Sorry for all the trouble.

[WildmaN]

I would be interested in these parts. Let me know, and do you accept Paypal? Shoot me a PM if you like.
Z31 ECU $50/obo
Z31 distributor $50/obo
Set of stock L28et pistons and rods $75/obo
Stock L28ET crank $75/obo
T4 adapter (if you decide to seperate it from exhaust manifold) I already have a L28ET intake and exhaust manifold

That is all for now...let me know, and thanks

[Spyder Z 15]

PM sent....

[WildmaN]

^ Cool sent a PM back to you.

[Spyder Z 15]

L28et crank, stock L28et pistons, Z31 ecu, Z31 dizzy, 280zx dizzy, Books, and all msd stuff - Sold

I/C with piping, L28et w/t4 adapter, flywheel, ross pistons, and valves -Pending sales.

[WildmaN]

Got the parts yesterday man. Yeah you were right....That crank is heavy. lol And the neighbor's thought I was getting a girl's bike. lmao. Too funny man. I can't wait to get started on my conversion. But it will have to wait for now. One question though. The dizzys you sold me...The 300zx one, where is the chopper wheel for it? Or is that a seperate piece? Also is the 280zx dizzy you sent me a turbo? Just wondering, I have never seen one up close.

[Spyder Z 15]

I think it's actually inside the dizzy. I'm not sure. I believe that the 280zx dizzy is a n/a one. I really am not sure cause when I bought the project it was in a lot of pieces.

[snwbrderphat540]

chopper wheel in the dizzies are the thin very very thin metalic disk with tiny nothings in it that pass under the CAS sensor. its under a protective shield thats held down by the rotar. the 280ZX turbo dizzy is MUCH larger in diameter than an NA one and will have a CAS wire on it (aboot 1/4 inch diameter wired with round plug)

[Spyder Z 15]

I/C with piping, L28et w/t4 adapter, ross pistons, and valves - All sold.